Max-Air 35 Scuba Tank Compressors

Compressors are shipped via Trucking Company, Shipping rates will be quoted at the time of order, UPS Shipping rates are not valid for the compressors

The Max-Air 35 is the most reliable, compact and portable compressor available today. Ideal for location dives (gas model) or pleasure boats where portability, space and weight are considerations. Economical to run and easy to maintain, theMax-Air 35 will give years of high quality breathing air in locations where dive centers or air stations are inaccessible. There are 4 models to choose, one gas engine model and a single-phase electric 110 Volt single-phase 220 Volt and a three-phase electric 220 Volt. All four models provide 4.2 SCFM (119 liters) with a maximum pressure output of 4800 psi (331 bars).

The compressors 4.2 SCFM (119 liter) volume can fill an 80 cu. ft.(2,265.4 liter) tank in approximately 22 min*. The gasoline and 110 Volt models are truly portable at only 85 lbs. (38 kg) and measure (L x D x H) 28" x 13" x 15" (71.12 cm x 33 cm x 38 cm). Mounted on a durable powder coated steel frame with convenient carry handles with reliable 6.0 HP Honda gasoline engine or 115v/230v/240v at 50 or 60 Hz electric motors, (plug not provided, consult your local electrical code). Compressors have oil/water separating chambers (manual drains), tri-chemical breathing air purification system with activated carbon/molecular sieve 13X/hopcalite and the disposable purification cartridge is convenient and ea sy to replace. Compressors are equipped with pressure maintaining valve for optimum air processing, intake filter, and a final pressure relief valve.

The digital hour/tachometer comes standard on gasoline model only. Phase 1 electric models come equipped with digital hour meter. These units have an oil filled pressure gauge 0-5800 psi (400 bar), and filling hose with on/off valve with bleed (SCUBA yoke or SCBA). The compressor is an air cooled, four stage, four cylinder high pressure, non-continuous duty, compressor, and has all stainless steel inter-stage and final stage coolers. The compressors maximum pressure is 4800 psig (330 bar) approximately, with an output of 3.5 F.A.D. 4.2 SCFM charging rate**. Maximum R.P.M. is 2800 and the lubrication system is a splash lubrication with oil thrower pin. The compressors oil capacity is 12 fl. oz. (354.88 ml), and requires the use of Max-Lube 501 synthetic compressor oil (see SKU: MXA35O1). The gas model comes with a 6' (1.83 meter) intake hose. Compressor noise level is 87 dB at 9.84' (3 meters). New feature standard now onThe 35 Gas Model is an automatic/adjustable pressure shut off switch. Compressors come complete with a spare parts list and owner's manual.

MAX-AIR 35 is not a continuous run Compressorand is not designed to fill HP-4500, 444 CFT. storage cylinders.

At the time of the order we need to know the following:
1). What the final pressure setting should be. There will be an additional charge if we ship a compressor and then have to exchange, resent, or replace the final pressure relief valve.
2). We need to know whether you want Scuba or SCBA fill whip.
3). We also need to know if the delivery address is residential or commercial. If we are not given this information we will charge the residential rate which is $75.00 more. If we are told it is commercial and it turns out to be residential when the unit is delivered you will be charged the additional $75.00.

*Time required tofill an 80 cu. ft. cylinder from 500 to 3000 psig
**Based on charging an 80cu. ft. cylinder from 500 to 3000 psig