Ikelite : Picture 1 regular
Ikelite : Picture 1 thumbnail Ikelite : Picture 2 thumbnail Ikelite : Picture 3 thumbnail Ikelite : Picture 4 thumbnail Ikelite : Picture 5 thumbnail Ikelite : Picture 6 thumbnail
Ikelite See all Ikelite items

Ikelite U/W Housing for Canon PowerShot G1 X Mark III Camera

SKU: IK614618 MFR: 6146.18

Your Price

$749.00
Buy more and save
Quantity Discount
QuantityAmount

The quantity discount will be reflected in your shopping cart

Temporarily On Backorder

Although this item is temporarily on Backorder, you can order it now and it will ship as soon as it arrives. Your card will only be charged once item is shipped.

Notify me when in stock

People Who Viewed This Item Also Viewed
Ikelite : Picture 1 regular

About Ikelite U/W Housing for Canon PowerShot G1 X Mark III Camera

A compact, full-featured underwater TTL housing for the Canon PowerShot G1 X Mark III camera. This system is suitable for scuba, snorkel, surf, pool, and any application in or around the water. The Canon G1X series gets a facelift with the smaller and lighter G1 X Mark III. The Mark III features a large 24MP APS-C sensor and 24-72mm f/2.8-5.6 lens. The fast and accurate Dual Pixel autofocus system is the same one used on current model Canon DSLRs. The camera features 1080/60p video resolution and a 'Dual Sensing' image stabilization system. An integrated TTL circuit is fine-tuned to Canon's latest flash exposure protocol for the most accurate exposure possible with the Canon PowerShot G1 X Mark III camera. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control (camera not included).

A fast and reliable strobe connection is essential to getting the shot underwater. This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.

Currently, only Ikelite DS strobes are capable of powering and communicating with the TTL circuit. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life but must be used in manual exposure modes only. Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Use of a fiber optic connector requires the camera's built-in flash to fire, bypassing the TTL functionality of the housing.

Great Handling:
Controls are provided for all important camera features. A new curved shutter lever feels natural and responsive. Knob controls are upgraded to our new soft-touch design which gives you extra grip and feels good whether you're diving with gloves or bare hands. Ikelite's push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off. Control placement mimics the way you use the camera on the surface to take advantage of muscle memory and avoid the need to re-learn your camera's controls.

The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface. There are two 1/4-20 mounts on the bottom of the housing for secure, rotation-free mounting of an optional tray and handles.

Wide Angle + Macro:
The 3" (76mm) diameter glass lens port features a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame (lenses not included). Ikelite 3" (76mm) diameter color filters press directly onto these ports. Filters are available for tropical blue water, green water, and fluorescence photography. Most wide-angle lenses require a 3.6" (91.4mm) diameter color filter (lenses and filters not included).

Vacuum System:
The optional Vacuum Kit # 47012 may be installed in place of the spare accessory port on the side of the housing. A vacuum system allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and O-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.

Construction:
Ikelite's new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. This material is 1/3 of the specific gravity of aluminum, making the housing much lighter and fundamentally corrosion free. The unique rear seal design prevents accidental twisting or stretching of the O-ring for simple and confident assembly. Ikelite has eliminated the need for an O-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless-steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the O-ring form a solid, watertight seal as it closes.Ikelite is proud to offer the only housing and lighting system for the Canon PowerShot G1 X Mark III that is 100% designed, built, and tested in the USA. Their housings are handmade and individually inspected for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. Ikelite back their products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.

Housing is depth rated to 200' (60 meters), all important camera functions are accessible, controls are not provided for the Wi-Fi button or Diopter adjustment control and Ikelite bulkhead connector with built-in TTL circuitry is provided. Housing has 1/4-20 thread tray mounting with 3" (76mm) spacing, 3.0" (76mm) diameter glass lens port with 67mm threaded front and is slightly negative buoyancy in fresh water. Housing measures 6" x 5.7" x 7.3" (152 x 145 x 185mm) and weighs 2.9 lbs. (1315 g). Included with the housing are an O-ring, vinyl port cover, waterproof bulkhead cap and owner's manual.

Warranty Information

This product has a limited warranty of 24 months.

https://www.ikelite.com/

317-923-4523

Ikelite U/W Housing for Canon PowerShot G1 X Mark III Camera Features

  • Ikelite Underwater Housing for Canon PowerShot G1 X Mark III Camera:
  • Full Featured and Durable Underwater Housing
  • Suitable for Scuba, Snorkel, Surf, Pool, Any Application In-or-Around the Water
  • Great Choices for Underwater Use
  • Packs Advanced Features & High Resolution into Compact Camera Body
  • Mark III Features Large 24MP APS-C Sensor
  • 24-72mm f/2.8-5.6 Lens
  • Note: Camera Not Included
  • Ergonomics and Handling:
    All Ikelite's Latest Features and Improvements
    Large, Easy-to-Reach Controls
    All Important Camera Functions
    Soft-Touch Knobs, Easy to Grip With-or-Without Gloves
    Provide Quick Access to Important Controls
    Rear Controls Marked w/Easy-to-See Laser Engraved Symbols, Never Fade or Fall Off
  • Front-Loading Camera Mounting System Makes Installation and Removal a Breeze
  • Standard 1/4-20 Mounting Point for Attachment to Tripod Topside
  • Wide Angle and Macro Close-Up Compatible
  • 3" (76mm) Diameter Ports Feature 67mm Thread
  • Two 1/4-20 Threaded Mounting Points
  • External Lights & Filter Compatible
  • 1/2-20 Threaded Accessory Port, Perfect for Optional Vacuum Valve to Check Water Tightness
  • Durability and Corrosion Free Performance
  • ABS-Polycarbonate Blend Provides Strength and Corrosion Free Performance
  • Specially Formulated Color Deflects Sun, Keeps Camera Running Cooler, Longer
  • Body Color: Superior Contrast for Enhanced View of Camera, LCD Screen, & O-Ring Seal
  • Unique Rear Seal Design Prevents Accidental Twisting or Stretching of O-Ring
  • No O-Ring Groove or Channel to Trap Sand, Dirt, or Debris
  • Two Double-Passivated Stainless-Steel Locking Lid Snaps
  • Clear Back Allows-You-to-See O-Ring Form Solid, Watertight Seal when Closed
  • Designed, Built and Tested in the USA
  • Locally Sourced, Top-Grade Materials
  • Built by Hand and Individually Tested for Fit and Function
  • Depth Rating: 200' (60 meters)
  • Over 50 Years of Experience & Best Reputation for Service within Dive Industry
  • Slightly Negative Buoyancy in Fresh Water
  • 1/4-20 Thread Tray Mounting w/3" (76mm) Spacing
  • Dimensions: 6" x 5.7" x 7.3" (152 x 145 x 185mm)
  • Weight: 2.9 lbs. (1315 g)
  • Includes: O-Ring, Vinyl Port Cover, Waterproof Bulkhead Cap
  • Instruction Manual
top
People Who Bought Items in
Share this item: