1.888.805.3600
|
|
|
|
Do you have a question about this product? Just ask the Pro.
Previous questions customers have asked about this item
is it just the housing or does it come with the camera?
This is just the housing.
I have one Canon 400D and one Canon 1DS MarkI and a speedlite 550EX.
Will i be able to use both cameras (one at the time ofcourse =) with the speedlite in this EWA bag?
The 400D should fit with the speedlite, but the 1DS Mark I will not likely not fit in. If you look at the bag size U-AFX, that will fit both the cameras.
Your question was submitted to our pro team. Someone will look into it and answer your question shortly
(Please allow 1-2 business days for a response).
The housing can be used on small boats, in the surf, while swimming, snorkling or diving. As the camera and its various components are can be operated through the plastic, the camras is operated normally and the use of an ewa-marine housing is easily adapetd to by the camera man.
The U-AXP is designed to fit almast all common SLR cameras on the market today, irrespective of the manufacturer or model. With this housing, a whole new world of applications openes up for your standard SLR camera: Inside the housing you can now take the camera safely canoeing, snorkling or even diving, up to a depth of 50 m / 150 ft.
The housing is larger than its sister modle, the U-AX, for two reasons: Firstly it was designed to take the larger SLR cameras like the Nikon F4, F5 and Canon EOS 1, EOS 3 (please note, that you will nead a special adapter for the AV110-X which is availible from your dealer or distributor) and secondly the extra volume of air trapped inside the housing allows for dive deapths of up to 50m / 150 ft !
If the optional BF1 lead weight is inserted into the housig, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.
Designed specifically for 35mm SLR cameras, the U-AXP housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.
It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket.
Yellow carry-case which has a water-proof interior and zippered side-pocket, manual for ewa-marine SLR-photo housings, initial supply of CD5, specially profiled foam padding, AV110-X autofocus adapter
|
|
|