What's in the box: 1'st Stage, 2'nd Stage, LP Hose, DIN to Yoke Adapter and Comprehensive Owner's Manual
The Flathead 7 is one of the Flagships of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle.
The Wide-Open Internal Structure allows for Direct and Unrestricted Airflow through the First Stage, giving very Low Breathing Resistance, even at great Depths and High Demands. It is very Low in Profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers. Zeagle's Conical Precision High-Pressure Valve provides much greater Reliability and Service Life compared to conventional designs, while Improving Responsiveness and Performance at all breathing rates. The Flathead 7 provides High Performance Porting in a Balanced Diaphragm Design First Stage that will give you years of service.
The Balanced Diaphragm, Chrome Plated Marine Brass First Stage Regulator is inherently Environmentally Sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. The added clear diaphragm membrane and hydro-transmitter, communicate external ambient pressure changes to the internal valve mechanism. The total exclusion of water from the regulator's interior including the spring chamber, means that no ice can form inside during cold water dives. The First Stage Regulator has 5 Low Pressure Ports 3/8"-24 UNF Thread and 2 High Pressure Ports 7/16"-20 UNF Thread.
The Zeagle ZX Second Stage is Lightweight, Compact and Comfortable. Its design features include Diver Adjustable Inhalation Resistance, Venturi (Free-Flow) Control, and Built in Heat-Sink for added Freezing Resistance. Over the years, evolutionary design changes have created a regulator that is Resistant to Free-Flow on the surface, with incredible smoothness and ease of breathing underwater. This Pneumatically Balanced Downstream Demand Valve Second Stage Regulator is manufactured from Brass, Flexible and ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber. The Standard Hose measures 30" (76 cm) and is 3/8" Threaded. The complete regulator weighs 2.54 lbs (1,156 g), comes with a DIN to Yoke Adapter, Comprehensive Owner's Manual, is Nitrox Ready to 40% out of the box and is covered by Zeagle's Limited Lifetime Warranty.
This product has a limited lifetime warranty.