Shopper
Is this regulator setup to dive with out of the box, or does it have to go to the shop for adjustments?
ALEXANDER C
You have to assemble it if I recall correctly, but there is no need to go to a dive shop before using it.
DAVID F
The regulator does not need any adjustments. I found it to be easy to use and an easy breather. I did find it had a tendency to free flow as you get into the water and you had to push the purge value to stop the free flow which was annoying. My friend loves Zeagles but I prefer scuba pro. Also you will need an octopus. If you are new to diving you may want to consider using Milex hoses which LP can put on for you. Good Luck and happy diving.
JUNE H
It is ready to dive out of the box.
MAURICE L
works just fine out of the box. You may have to screw in the hose to your SPG and dive computer, which just requires an Allen wrench.
MARLEY M
All regs are "adjusted" from the factory but its always recommended to have it tested by a shop before use.
Leisure Pro should be able to throw it together and test it before sending it to you.
Happy diving (GO ZEAGLE)