Will the E-Z Mount Zip-on Pouch fit straight to my Stiletto BCD?
To fit the pouch to your Stuletto BC you need to purchase the corresponding zipper add-on attachments from Zeagle. These zip attachments are relatively inexpensive and can be added directly to the Stiletto under the back pad. After the attachments are in place you can zip the pouch directly to the side of the BC where it will sit discretely under the side bladder clip. I have the Stiletto BC for travel and have used this system for two plus years. It is very reliable and streamlined. I highly recommend it. I often have to deploy my SMB during drift dives and this set up works very well for that.
My experience level: OWSI. Number of dives: 600+.
It should, assuming you have the zip mounts on either side of your BCD. I have it zipped into my Ranger BCD and it is nice to have the signal tube tucked away.
Yes. This is exactly what we did bought... Same BCD and same accessory, the E-Z mount zip-on pouch with the signal tube. It worked perfectly with no issues.
It zipped directly onto my zeagle ranger ltd BCD
Should work with stiletto if it has open zippers
Does your Stilleto have one side of a zipper on the underside of the bladder wing?
If so, it should work fine, though you may need to loosen the strap which pulls the wing forward, in order to make room underneath the wing.
You'll need the Zeagle Zip Mount Adapter (8137). The setup comes with two; one for each side of the BCD and took me about 10-15 minutes to install (good install video on Zeagle's site). I use the left side for the Signal Tube, and the right for a 6 CF Zeagle Pony Bottle (750-6206). They are awesome! Keeps the signal tube and spare air tucked in very nicely, but still accessible. When not in use, you just unzip the accessories, and you don't even know that anything is left. Chris A - PADI Instructor
It should if your bc is already set up to take it. You will see a 1/2 of a zipper between your wing and back plate. If not you can purchase the ez mount kit for $20 or so and it's easy to install. You will need to remove the two tank straps and it weaves into them and fits between the wing and front strap. It works great for other accessories as well. My Ranger did not come with them so I needed to add them when I purchased this as well.
No. You will have to get the zipper mounts that will be strapped to the BC with Velcro and the cam band. It requires a but of dis/reassembly but quite worth it.
Okay, How about the standard E-Z Mount? Does that require any further parts?