great way to have this on a second BC and only have to move your Signal Tube and not have to disassemble each time. I have a BC for Local and one for Travel.
Works great for backplate and SMB
By
brent b.
-
Kansas City, KS, IT
Works well, fits my 6ft SMB and reel while still connected for quick deployment. The holes line up perfectly with my backplate on the bottom and the side. It's just nice to have it easily accessible and have a bungee drawstring so ensure it stays closed.
The E-Z Mount QD Pouch can easily hold a signal tube, lift bag or similar object. An elastic drawstring top with barrel lock fastener securely closes the open end of the bag but easily adjusts to make removing items quickly a simple motion. The bag has several grommet holes positioned to allow you to attach it to any location on the BC with zip ties or Zeagle's Quick Link w/ Strap for a semi-permanent attachment (see SKU: ZGLQL). Made from durable rapid draining mesh material and nylon webbing loops this E-Z Mount will give you years of reliable use. The circumference of the pouch measures approximately 10" (25.4cm) around at its narrowest point and easily fits both of Zeagle's Standard and Deluxe Signal Tube packages (see SKU: ZGLDSTO).
This product can only be shipped to U.S. addresses.
William L
What clips are required to attach this to the Stiletto BCD?
JOE S
You can use a few different types of attachments ranging from zip ties, book screws, bolt snap and Carabiner type clips.
JIM E
double black tie wraps........ black holds up better in the sunlight.....right side in front... opening pointed left...so you can get to it with either hand....attach a single black tie wrap to the opening of the bag so you can find it by feel if you have to. be sure to take it out after every trip and soak it clean...salt crystals are abrasive and you need to know every time the tube will work.....Mini season in Ft Pierce Fl on the years the current is ripping one to four inexperienced divers die because they didn't have one of these devices .... for what it's worth.
CHRIS R
I love my Stiletto but I don’t have anything positive about this product. It fit poorly on my stiletto medium. The concept is good but the execution is poor - it’s too difficult to reach backwards and expect to untie the bungee while tanking the smb/reel combo all with one hand. The bag itself was too narrow. On a dive where there is more than one deployment you’d never get it back in the bag without removing your bc. For SMB general use I would keep that safety item free and clear of all bags and straps. In other words let it clip directly to a D ring so it’s easily accessed and stored - all without having to remove BC.
Andrea V
You're 'supposed to' us the screws to place it in the existing grommets, but they don't really line up for that. I use "Stainless Steel Wire Ring 2mm Cable Loop Rings" from Amazon to connect it to the bottom of my stiletto.
Shopper
How long is it? What size pony bottle could fit in it?
JOE S
The only size tank that will fit in it is a 6cuft or smaller. It is not intended for a pony bottle. It is meant for a SMB. Some do use it for small size inflation bottles for a dry suit, but would not depend on it to hold more gas than that or trust it to bail out on.
JIM E
this is not intended for a pony bottle. i would not recommend it for that use. i use Z eagle's pony straps they work great.
ERIC N
I think it was 10-12" or so. I lost mine. Way too small for a pony though.
Shopper
Does this have the zipper connection for the side mount for the zeagle ranger LTD (wing mount)?
GEORGE P
No , No zipper
AUBREY F
This version of the pouch does not appear to have the zipper. It attaches with a type of clip. There is another version with the zipper. I have both.
CHRIS O
No, it has grommets.
BEN W
no
Shopper
Is there any loops on the rear or this bag to slide a tank cam strap threw? I would like to attach it to the top of my tank on my Zeagle Rapid Diver. If this will not work ,does anyone have a suggestion of what type of bag it can use to secure some cutting pilers and a pry bar in?
KEN O
There are no slots for a tank strap.
I wouldn't recommend this pouch for tools.
It works great for an SMB though.
KO
FRANK S
It only has grommets but I used neoprene tubing through the grommets to secure it to the strap. Seems to work just fine.
MIKE P
There is nothing on the rear of the bag. The only attachment points are the ones depicted in the picture. The back side looks identical to the front.
JOEL E
No. The picture is pretty accurate. The only attachment points are 5 grommets along the one reenforced side. Also the fabric is quite stiff and only has a draw string closure. This is enough to keep a safety-sausage and spool in; but I would not trust it to retain small/narrow objects securely. I am not aware of anything factory ready as you described. If you live in a town that has a tent&canvas shop you can likely get something made to your specific needs for a reasonable price. (The material reminds me of a tennis court wind screen fabric.)
Shopper
Does it fit to zeagle 911?
MIKE P
Unsure, look at the Zeagle 911 and check for sufficient connection points. Just use zip ties to connect it wherever you like. I used it on my Apex BCD, it hangs behind the wing just above my butt out of the way. I keep a surface marker, whistle, small reel and line inside for emergencies.
RICHARD D
I bought 2 of these, I put one on my wife's ScubaPro BC and the other one on my Halcyon BC, They hold our Halcyon Signal Tubes and cave reel. I just attached with Zip Ties, went to Cocos Island and they function perfectly.
ROBERT M
Sure does... right under either wing. Need finger spool and two clips or small locking D-rings. I use two on my 911... Very convenient. Best fishes!
Taner K
Do you have a picture of it? How did you attach to the bc?
