Please Note: Due to Passover Holiday, LeisurePro will be closed from April 14 - April 23. *All orders placed after April 14, 10AM Will ship after we reopen on April 23,

We apologize for any inconvenience and we thank you for your patronage - Here is a link to our Holiday Calender
Scuba Surface Marker Buoy (SMB)

Orange

Scuba Surface Marker Buoy (SMB) Features

What's in the box: XS Scuba Surface Marker Buoy (SMB)

Divers are all supposed to carry a Surface Marker Buoy (SMB) to comply with national dive safety standards. That nice, but your safety is important with or without standards, so the smart diver always carries a surface marker buoy on every dive. XS Scuba's Safety Marker Buoy is huge with a 7' (2.13 meters) overall length (6'/1.83 meters out of water) and a 22" (60 cm) circumference. Built tough to last, Surface Marker Buoy meets Military Specification. Buoy is manufactured from Tough Urethane-Backed, Nylon Material for durability and years of service. Buoy has SOLAS reflective tape on both sides for maximum visibility.

Surface Marker Buoy is equipped with elastic loop at top for attachment of a chemical light for night diving applications, and has a Stainless Steel D-Ring for attachment of a slate. An Overpressure Relief Valve with pull for manual release of air, a combination oral and BCD QD Inflation Valve with Cap Cover, Anti-Spill" Bottom with Baffle to allow easy fill from any air device and it keeps buoy inflated until you empty it.

Buoy has an 18" (45.7 cm) Step-Thru Leg Harness with Stainless Steel D-Ring at Bottom and Lift Handle at Top for Easy Retrieval from a boat or dock. Buoy rolls up to a compact size and a Velcro strap keeps it rolled and compact when not in use. Buoy can also double as a lift bag if needed with its 50 lbs (13.6 kg) capacity and lift straps with stainless steel D-ring at the bottom. XS Scuba's SMB is available in Orange or Yellow Colors.

Key Features

  • XS Scuba Surface Marker Buoy (SMB)
  • HUGE, 7' (2.13 meters) Long x 22" (60 cm) Circumference (6'/1.83 meters out of the water)
  • Mil-Spec, Urethane-Backed, Nylon Material
  • SOLAS Reflective Tape, Both Sides for Maximum Visibility
  • Elastic Loop at Top for Chemical Light Attachment
  • Stainless Steel D-Ring at Top for Slate Attachment
  • Overpressure Relief Valve with Pull for Manual Release
  • Lifting Handle at Top of Tube
  • Combination Oral and BCD QD Inflator
  • Anti-Spill Bottom with Baffle Allow Easy Fill from Any Device
  • Remains Inflated Until you Empty It
  • Rolls Up to Compact Size and Stays Closed with Velcro Strap
  • 18" (45.7 cm) Step-Thru Leg Harness with Stainless Steel D-Ring at Bottom
  • 50 lbs (13.6 kg) of Lift Capacity
  • Lifting Strap with Stainless Steel D-Ring at Bottom
  • Available in Orange or Yellow

Warranty Information

This product has a limited warranty of 24 months.

www.xsscuba.com
(866) 977-2822