What's in the box: 1'st Stage, 2'nd Stage, LP Hose and Owner's Manual
The SeaAir Tri-Metal Regulator provides the performance of today's most expensive regulators, yet is moderately priced. There is no better value. Manufactured from Stainless Steel, Aluminum and Brass, the SeaAir uses the Metal Best Suited for the Job. The SeaAir is factory cleaned and ready for Pre-Blended Nitrox up to 40% FO2. Engineered to deliver the most air at all diving depths, and with just two simple turns of the Adjustment Control Knob, you can quickly De-Tune or Fine-Tune the Second Stage.
The SeaAir First-Stage Regulator is a Balanced High-Performance Flow-Thru Piston Design utilizing 316-Grade Stainless Steel in the manufacturing of the Piston for Corrosion Resistance and Extreme Durability. Regulator is equipped with a 360° Low Pressure Swivel which has 5 LP Ports for Unlimited Hose Routing and Set-Up Configuration. Two HP Ports and Chrome Plated Marine Grade Brass Body and Swivel Turret complete the First-Stage Regulator.
The SeaAir Second-Stage is a Pneumatically Balanced Valve Design for High Performance at all diving depths and activities, incorporates Hi-Lift Pivot Lever, Marine Grade Brass LP Tube, Stainless Steel Quick Acting Spring, and a Large Bore, Adjustable Valve Orifice to provide High Flow of Gas to the Diver. Exhalation Effort is Minimal due to a Large Oval Exhaust Valve with a Chambered Exhaust Tee that Directs Bubbles Away from the Divers Face. Fine Tuning of the Breathing Resistance can be achieved with the Diver Adjustable Control Knob.
The Performance of the SeaAir goes beyond the limits it Exceeds all US Navy Class "A" Standards, was a "Tester's Choice" in Rodale's Scuba Diving Magazine. Regulator comes with a Low Pressure Hose, Hose Protector; Comprehensive Owner's Manual and is covered by a Limited Lifetime Warranty.
This product has a limited lifetime warranty.