XS Scuba Navigator Console and Compass,36" Hose

Your Price:

$210.00 You save: $20.00 (9%)

List : $230.00

XS Scuba : Picture 1 regular $210.00

About XS Scuba Navigator Console and Compass,36" Hose

Looking for a complete Analog Instrument Console in a Compact Boot Format? The XS Scuba Navigation Console Packs a Pressure Gauge, Depth Gauge and a Compass Module into a great Ergonomically Design Console. Pressure Gauge is a Highly Accurate Bourdon Tube Design, Reads Pressure from 0 to 5,000 psi and features a Built-In Thermometer for Temperature Readings. Gauge has Red Highlighted Readings from 0 to 500 psi for Safety Reserve Air. Thermometer Needle is Brightly Colored for Ease of Reading. Pressure Gauge comes with a 36" (91.4 cm) High Pressure Hose with 7/16" Threaded end.

The Depth Gauge is a Air Filled Steel Diaphragm Depth Gauge with a 0' to 200' Readout and Maximum Depth Indicator Needle (MDIN). The Maximum Depth Indicator Needle is pushed by the Gauge Depth Needle until the diver reaches their Maximum Depth and will remain there for the duration of the dive to indicate the divers Deepest Depth Reached during the dive. This feature allows the diver to not record that depth while actually diving, yet will be available upon surfacing for later use for Repetitive Dive Calculations. The Depth Gauges Colored Graphics allow quick glance monitoring with Bright Red Depth Indicators at Strategic Positions on the Gauge Face. The Red Indicators are at Depths beyond the Standard Sport Limits of 130' to 200', Warning the Diver of the Excessive Depth.

The Highly Accurate Compass is Calibrated for the Northern Hemisphere. The Compass is Liquid Filled for a Quick and Responsive Movement. A Ratchet Bezel with Numerical Compass Headings in 30° Increments and 10° Indicator Markings for Calculating Compass Headings. The Bezel has Twin Heading Indicators for Alignment of Compass Course and a Lubber Line across the Compass Face. A Side Window with Compass Degrees allows Gun-Sight Accurate use when precise headings are required. All 3 Gauge Faces are Luminescent for Ease of Reading in Low Light or Night Diving Conditions, and are housed in an Impact Resistant Rubber Gauge Boot. Console is Proudly Made in the USA and is covered by a 24 month limited warranty.

Warranty Information

This product has a limited warranty of 24 months.

(866) 977-2822

Share this item: