Milflex : Picture 1 thumbnail Milflex : Picture 2 thumbnail Milflex : Picture 3 thumbnail Milflex : Picture 4 thumbnail Milflex : Picture 5 thumbnail Milflex : Picture 6 thumbnail Milflex : Picture 7 thumbnail Milflex : Picture 8 thumbnail

Your Price:


About Miflex Low Pressure Hoses

Do you want to run two second stage regulators from one low pressure (LP) hose? XS Scuba's LP Hose Splitter can make this happen. This Durable Corrosion Resistant Chrome Plated Brass LP Hose Splitter allows you to route two Second Stage Low Pressure Hoses from one LP Hose or maybe you want to run an Inflator Hose and a Second Stage. Whatever 3/8" Threaded Hose Configuration you are looking to route can be accomplished with this Adapter. One end is equipped with 9/16-18 Male Inlet Threads that will couple with the Swivel End of an LP Hose while the Opposite End has two 3/8-24 Female Outlet Threads to facilitate two First Stage Ends of Low Pressure Regulator, BCD or Dry Suit Inflator Hoses. LP Hose Splitter is designed for Low Pressure use only, below 200 psi (13.8 bars). Splitter makes a Great Save-a-Dive Kit item.

Warranty Information

This product has a limited warranty of 24 months.
(866) 977-2822

Miflex Low Pressure Hoses Features

  • XS Scuba Miflex Low Pressure Hoses
  • Patent Pending Double Nylon Safety Braiding Designed
  • Inner Liner Layer of Polyester and Polyurethane Compound Liner
  • Designed to Outperform and Outlive Traditional Rubber Hoses
  • Fitting & Sleeves: UNI 12164 CW 614N Chrome Plated Brass
  • Hose Resistant to UV Rays
  • Minimum Burst Pressure of 3600 psi (250 bar)
  • 30 Performance and Safety Tests
  • EN250 Certified
  • 30% Lighter than Equivalent Length Rubber Hose
  • Unmatched Flexibility
  • Average Lifespan: 3 Times Longer than Rubber Hoses
  • Oxygen Cleaned from the Factory
  • Kink-Resistant Design: Tie in Knot, Air Flow Unobstructed
  • External Diameter: 0.47" (12 mm)
  • Internal Diameter: 0.26" (6.5 mm)
  • 16 Lengths: 6" to 1,200" (15.2 to 3,048 cm)
  • Color: Multiple
  • Premium Packaging Doubles as Water Resistant Document Wallet
  • 2 Year Limited Warranty

Miflex Low Pressure Hoses Specifications

Hp Or Lp
Outer Jacket: Double Nylon Braiding, Polyester And Polyurethane Compound Liners
Multiple: 6" To 1,200" (15.2 To 3,048 Cm)
Working Pressure
500 Psi (35 Bar)
Burst Pressure
3600 Psi (248 Bar)
0.47" (12 Mm)

Miflex Low Pressure Hoses Customer Reviews

Write a Review


by PowerReviews
MilflexMiflex Low Pressure Hoses

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top



By Mr Leaky

from Anchorage, AK

About Me Advanced

Verified Buyer


  • Easy To Use
  • Functional
  • Improves Diving Experience


    Best Uses

      Comments about Milflex Miflex Low Pressure Hoses:

      Not only is it better in the water than a standard hose, it coils into for travel.

      • Type Of Diving:
      • Warm Water Diving
      • Male/Female:
      • Male
      • Was this a gift?:
      • Yes

      Comment on this review

      Displaying review 1

      Back to top


      Questions & Answers Powered by TurnTo®

      Questions about this item:

      Shopper  Why Did You Choose This?
      Roger H  wanted to try this hose out, for comfort, flexibility, etc
      Alen D  Where to find hose protectors? Miflex hoses have slightly smaller diameter.
      Frank L  These are a little more snug, and should work better:
      Kae T  Hi, I'm using the Mares 52 Carbon and it has a LP 1/2" port on the 1st stage for their DFC. What thread does the miflex hose come with? (i know a standard LP is 3/8")
      Kasia W  This is a standard 3/8" hose.
      Share this item: