Highland by XS Scuba Dry Suit Inflation Kit

Highland by XS Scuba Dry Suit Inflation Kit Features

What's in the box: Low Pressure 8 cu ft Cylinder, PRO DIN/Yoke Combo Valve, Highland Pony Mount, Highland Compact First Stage, Mini Tech Gauge, DIN Cap, Over Pressure Relief Valve, 22" EZ Quick-Disconnect Hose, Argon Sticker

Keeping warm when diving can be one of the most difficult things to do. If you wear a dry suit you can remain warmer for longer periods of time then if you wear a wet suit, but even a dry suit can allow you to have heat loss. One way to increase the retention of body heat in a dry suit is to use argon gas to fill it rather than air or nitrox. Argon is a great insulator, being heavier then air or nitrox argon will keep you warmer longer.

XS Scuba's Highland Dry Suit Inflation Kit can increase your bottom time by keeping your breathing gas for just that, breathing and it also can increase your bottom time by keeping you warmer. Kit comes complete and ready for use. Kit is easy to install and includes an 8.4 cu ft low pressure 2,015 psi (237.9 liter/139 bar) Aluminum Catalina Cylinder which is CGA Color Coded for Argon Gas Only, with warning stickers. XS Scuba's DIN/Yoke Pro Valve completes the cylinder assembly. To attach your argon system to your primary cylinder system Highlands Pony Mount which is made of (Grade 316) Stainless Steel and attaches directly to your standard 2" (5.1 cm) Cylinder Band and will fit from 6.9" to 8.0" (17.5 to 20.3 cm) diameter cylinders without the use of hose clamps.

Attached to the cylinder valve is a factory set 120 psi (8.27 bar) IP compact simple Fail Safe Flow-By Piston Designed First-Stage Regulator equipped with a Over-Pressure Relief Valve mounted in a LP Port for added Safety. A Mini Tech Gauge is also attached to the first-stage with a 0-5000 psi range of reading. To complete the assembly you also get a 22" (55.9 cm) EZQD Hose and Delrin DIN Cap to protect the first-stage when not attached to the cylinder.

So stay warmer and get better bottom time with Highlands by XS Scuba Argon Dry Suit Inflation System (primary cylinder and BC mounting strap in above image not included).

Highland Complete Argon System

Pony Mount HL409
316 Grade Stainless Steel Attached to Your 2" (5.1 cm) BC Strap Fits 6.9 to 8.0" (17.5 to 20.3 cm) Diameter Cylinders No Hose Clamps

Argon Sticker ST240
Bold "Do Not Breathe"
17.5" x 3.5" (44.5 x 8.9 cm)

Argon Cylinder AL08RG
2015 psi (139 bar) Low Fill Pressure
8.4 cubic feet (237.9 liter)
4.4" (11.2 cm) Diameter & 10.9" (27.7 cm) Height
3.8 lbs (1.73 kg).
Buoyancy Full -1.7 lbs (-77 kg).
Buoyancy 500 psi -1.0 lbs (-0.45 kg).
Painted Bright Orange
CGA Color code for Argon Gas
Manufactured by Catalina

PRO Valve VX200-20N
INTL DIN/Yoke Combo Valve
Removable DIN Insert

OPV Valve AC395
Prevent Over-Pressurization
Mounted to 3/8" LP Port
200 psi (13.8 bar) Relief
Stainless Steel Spring

Mini Tech Gauge HL501
0-5000 psi
1" (2.5 cm) Diameter Face
220 Degree Sweep
Chromed Brass Case

DIN Cap HL401
Machined Delrin Construction
Seal the 1st Stage from Moisture
Protect Threads on 1st Stage
Attached Nylon Cord Lanyard

Argon First Stage HL405
DIN 300 bar Inlet
Factory set at 120 psi (8.27 bar) IP
Compact Low-Profile Size
Simple Flow-By Piston Design br>
Attachment Hose EZQD-22
22" (55.9 cm) Long Low Pressure Hose
EZQD Attachment - "Just Push"
Wide, Easy Grip Collar
Flattened Side to Prevent Interference

Key Features

  • Increase Retention of Body Heat
  • Argon Gas System
  • Argon: Heavier then Air or Nitro
  • Greater Insulation Properties than Air or Nitrox
  • Saves Breathing Gas for Breathing
  • Improved Air Consumption
  • Increased Bottom Time
  • Kit comes Complete, Ready to Use!
  • Easy to Install
  • Cylinder:
  • Aluminum Catalina Cylinder
  • Volume: 8.4 cu ft (237.9 liter)
  • Service Pressure: L P 2,015 psi (139 bar)
  • CGA Color Coded for Argon Gas Only
  • Valve:
  • XS Scuba's DIN/Yoke Pro Valve
  • Durable & Reliable Design
  • Combination DIN/Yoke Outlet
  • Removable DIN Insert
  • High Flow Valve
  • Safety Hand Wheel
  • Triple Bright Chrome Finish
  • Regulator:
  • Simple Fail Safe Flow-By Piston Design
  • DIN 300 bar Inlet
  • Compact and Low Profile
  • Factory Set: 120 psi (8.27 bar) IP
  • DIN Cap with Lanyard for Protection
  • Mini Tech Gauge, 0 to 5,000 psi with Wide 210° Sweep
  • Over Pressure Relief Valve (OPV)
  • OPV Mounts in 3/8" LP Port
  • Prevents Over Pressurization for Safety
  • 200 psi (13.8 bar) Relief Pressure
  • Attachment Hose EZQD-22
  • 22" (55.9 cm) Long Low Pressure Hose
  • Durable Breaded Construction
  • Mounting System:
  • Highland Engineered Quality Pony Mount
  • 316 Grade Stainless Steel
  • Attached to 2" (5.1 cm) BC Strap
  • Fits 6.9 to 8.0" (17.5 to 20.3 cm) Diameter Cylinders
  • No Hose Clamps
  • Buoyancy Characteristics:
  • Full -1.7 lbs (-77 kg)
  • 500 psi (34.5 bar) -1.0 lbs (-0.45 kg)