Studies have been performed showing a significant improvement in dry suit thermal protection can be achieved when using argon instead of air as a dry suit inflation gas. Overall, the total suit insulation increased by approximately 20%. If you Dive a Dry Suit and want to be warmer longer than you should be using an Argon Regulator System. Highland by XS Scuba's Argon Regulator is a complete regulator system set up specifically for use with Argon Gas.
The First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 115 to 125 psi (7.9 to 8.6 bars) intermediate at 3000 psi (200 bars) cylinder pressure. The Compact Low Profile First Stage is manufactured from Durable Marine Grade Brass with a Black Finish has one High Pressure Port and two Low Pressure Ports. Regulator comes equipped with a 200/300 bar (3000/4350 psi) DIN Connection which can be quickly converted to a Yoke Style First Stage with the addition of an Optional Spin-On Yoke Adapter.
The Regulator System also includes a 22" (55.9 cm) Miflex Quick Disconnect Hose (SKU: XSSQDH) for attachment to your Dry Suit Inflation Valve, Over Pressure Relief Valve (SKU: XSSSOPV), Mini Tech Gauge (SKU's: XSSMTG or XSSMTGM) in Imperial or Metric and to Protect the First Stage when not mounted on a cylinder a Delrin DIN Cap with Lanyard (SKU: XSSDDC). If you want to stay 20% warmer when Dry Suit Diving Highland by XS Scuba's Argon Regulator is what you need. Once you dive Argon you'll never go back!
This product has a limited lifetime warranty.