Did the job. I used the attachment on my Scubapro BC to attach the Tusa Mini Knife and it worked well.
Nice option
By
Opie
I purchased this to compliment my new conquest 2 bcd which had been fitted for bcd knife mounting. I found it so handy that I had an older bcd retrofitted with 5/16" brass grommets in one of the main pockets to match the stud pattern of the adapter and now I can use it on that bcd.
Most BCD knife mounts provide a soft mount" for a BCD knife which depends on the knife sheath for rigidity. The placement of the BCD knife on the top end of a pocket tends to put it in a position that is not easy to locate when wearing a mask and the diver must depend on touch" to re-locate the sheath to insert their knife in the sheath. Having a solid-mount" provides rigidity and makes re-insertion of a knife in its sheath easier in this scenario.
The TUSA Mini Knife Attachment is ideal for attaching an TUSA FK-10 or FK-11 BCD Knives (see SKU's: TBTK10 or TBTK11) to a BCD equipped with knife grommets. Mount kit comes with a ridged mounting plate and 2-threaded finger screws for easy attachment and removal of plate. Plate is made from durable impact resistant non-corrosive plastic.
This product can only be shipped to U.S. addresses.
Shopper
What is the distance between the grommets?
Eric L
There’s actually three of them. Two are spaced by 2 and 3/4 and the third is at 3 and 7/8 from the first
Mario C
Thank you for your question and answers. One minor correction Eduardo, 3 holes (correct) distances are 70mm and 98mm.
Hope it helps
Eduardo M
There are 3 grommets and the distance from knife opening diside to the knife tip end are: 70mm and 90mm.
John V
Do you still use the clip attached to the sheath with this product or does the knife screw on to the bcd more securely?
Eduardo M
The clip is removed and the attachment plate is screwed through the BCD onto the knife sheath.
Michael R
You do not use the clip, it will be removed and this attachment screws into its place for a very secure fit. The two thumb screws then attach the device to the BCD for a good positive mounting.
DANIEL S
The sheath screws to the BCD or whatever you attach it to. The TUSA BCD has grommets, not visible in the picture, that align with the screw holes. The clip is not used anymore, and the sheath is now firmly attached to the BCD. Hope this helps.
BESTCONNECTIONS 1
Take the clip off and screw directly to bcd to get a lower profile, so things don't get hooked on it. It's much sturdier then using the clip.
SHANNON W
It screws onto the BCD using the grommet holes.