About Sea & Sea YS-D2 Lighting Package with Sea Arm 8
Warranty Information
This product has a limited warranty of 12 months.
(562) 498-3708
Sea & Sea YS-D2 Lighting Package with Sea Arm 8 Features
- Sea & Sea YS-D2 Lighting Package with Sea Arm 8:
- Complete Light Strobe and Arm System
- Designed for Compact Digital Cameras
- Owner Manual's
- Sea & Sea YS-D2 Strobe:
- YS-D2 Sets New Standard for Underwater Strobes
- A Must-Have to Enhance Underwater Photographs
- Reintroduces Color that's Lost at Depth
- Most Important Accessory for Underwater Photography
- New Features: Audible Confirmation Providing;
TTL Confirmation
Ready Light Confirmation
Rear Glowing Panel with Easy to Read Controls:
Ready/TTL-Fully Charged
Dual Powered Target Light w/Red Filter
Wing Nut Style Fixing Bolt
New Control Knobs
Newly Designed Battery Compartment - Digital Slave TTL II, TTL and Manual Exposure Adjustment Modes
- 11 Steps of Manual Adjustment
- Guide Numbers from 1 to 32
- TTL Hardwire or Slave Strobe Capabilities
- Adjust Interval Between Pre Flash and Primary Flash
- Compatible with Wide-Variety of Cameras
- Most Versatile Underwater Strobe Available Today
- Power Sources: 4 Alkaline AA or 4 AA Ni-MH
- Burn Time: Alkaline Batteries: 150 Flashes, Ni-MH Approx. 250
- Guide Number: 32 (at full flash) ISO 100/m, 24 w/Diffuser 100, 20 w/Diffuser 120
- Beam Angles:
80°x 80° Degrees (w/o Diffuser)
00° x 100° Degrees (with Diffuser 100)
120° x 120° Degrees (with Diffuser 120) - Construction: Polycarbonate and ABS Resin
- Color Temperature: 5600K Full Flash Land, 5250K with Diffuser 100
- Dimensions: (W x H x D) 3.5" x 5.4" x 4.4" (87mm x 135mm x 111mm)
- Weight: 22.8 oz. (650g) w/o Batteries
- Buoyancy: Negatively Buoyant 0.4 oz. (5g)
- Depth Rating: 330' (200 meters)
- Includes:
Diffusers
Diffuser Straps
YS Mount Adapter
Silicone Grease
Ball Mount Adapter
Fixing Bolt
Hexagon Wrench
Red Filter
Spare Cap Bolt
Owner's Manual - Sea & Sea, Sea Arm 8 Compact Digital Set:
- Complete Lighting Arm Set
- Fits Most Compact Digital Systems
- Great for Strobe and Light Mounting
- Corrosion-Resistant Aluminum Alloy (Anodized Body)
- Stainless Steel, Brass and Rubber Hardware and Components
- Sea & Sea Fiber Optic II Sync Cord:
- 2 Sea & Sea Fittings
- Coiled Sync Cord
- Links Underwater Strobe to Cameras Waterproof Housing
- Compatible with All Sea & Sea Strobes and Housings
- Allows Triggering of Strobe by Cameras Built-In Flash
- Coiled Design:
More Length Potential w/o Tangling
Accommodate Complete Flexibility of All Strobe Angles - Construction:
Methacrylic Resin
Combination of 613 Fibers
Resistant to Distortion, Bending and Physical Impact
Increased Durability - Bi-Directional: Designed for Use with Internal Optical YS-Converters
- Length: 18" (45.7cm)
- Fiber Diameter: 0.059" (1.5mm)
- Cable Diameter: 0.105" (2.7mm)
- Sea & Sea Strobe Mask Set:
- Allows Connection of Most Sea & Sea Strobes to Compact Digital Camera Housings
- Designed for Camera Housings w/o Fiber Optic Cable Port
- hook and loop Tape Sticks to Housing to Cover Camera's Built-In Flash
- Grommet: Allows Cable to Attach In-Front of On-Camera Flash
- Camera Flash Triggers External Strobe
- Prevent Back Scatter from On-Camera Flash