Sea & Sea YS-D1 Strobe Package with Arm and Tray

Sea and Sea
SKU: SSYSD1P MFR: SS-70042

This item is no longer available. Here are Similar Strobes & Focus Lights:

About Sea & Sea YS-D1 Strobe Package with Arm and Tray

For External Flash Attachment the Fiber-Optic Cable (L-Type) SKU: SSFOL is use in conjunction with the Mask Set SKU: SSSMS to Mask the Cameras Built-In Flash. The Mask Set includes a Grommet and Nut, Strobe Masking Material, 2 pieces of Tape and Instruction Sheet for Mounting. Sea Arm VII-Tray with Arms SKU: SSSA7C is used in combination with housings for compact digital cameras. This arm stay set has been updated to allow greater tightening force. Plastic resin construction prevents electric corrosion and makes it more durable. The new ball joint design allows firmer tightening and smoother loosening, and tighter grip at each joint makes arm position more secure. The Stay measures 1.6" x 2.8" x 4" (40 x 70 x 135 mm) and the Arms measure 18" (450 mm). The Stay and Arms weigh 24.5 oz (701 g)

YS-D1 Strobes SKU: SSYSD1, the YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1. Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system. The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today. The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable. In a clear water environment, two YS-D1 strobes in DS-TTL ll mode provide perfect lighting. The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode.

The YS-D1 has a Mode Switch for Off and TTL, a Target Light Switch for On/Off and a Light Level Control Dial. Strobe is equipped with 3 Indicator Lights; Ready Lamp (red), TTL Lamp (green) and Slave- TTL (blue). Strobe has a Beam Angle of 80 and a Color Temperature of 5600K. The YS-D1 is powered by 4 x AA or Ni-MH Batteries (not included) and depending on the batteries used will provide from 150 to 250 Flashes. The Strobes Recycle Time with Alkaline Batteries is approximately 2.8 seconds and with Ni-MH Batteries 1.9 seconds. The Strobe is constructed from Polycarbonate and ABS Resin and measures 3.4" x 5.3" x 4.4" (87 x 135 x111 mm) and weighs 22.9 oz (650 g) on land without batteries and is negatively buoyant -0.02 oz (-0.5 g) underwater with batteries. The YS-D1 is Depth Rated to 330' (100 meters) The YS-D1 Strobe comes with Comprehensive Owner's Manual.

It's EASY 1-2-3! The one-stop web resource that explains which housing, strobe, ports, and accessories are compatible with your digital camera is now available online!

EASY 1-2-3 shows you step-by-step how to create your very own system! You select your housing and compatible lenses, and ports are given to you followed by compatible strobes and cables. Creating your system has never been easier. Forget the headaches trying to explain housing systems to customers. EASY 1-2-3 does the job for you!

Check out SEA&SEA EASY 1-2-3 now!

Sea & Sea YS-D1 Strobe Package with Arm and Tray Features

  • Strobe:
  • Sea & Sea YS-D1 Strobe
  • New Standard for Underwater Strobes
  • Guide Numbers: 1 to 32 Underwater Lighting is Effortless
  • Revised Algorithms for DS-TTL System
  • Totally New Slave TTL System
  • DS-TTL ll Mode is More Responsive, More Precise and More Reliable
  • Most Versatile Underwater Strobe Available
  • DS-TTL Exposure Compensation Function Enables Subtle Lighting Control
  • Mode Switch for Off and TTL
  • Target Light Switch for On/Off
  • Light Level Control Dial
  • 3 Indicator Lights; Ready Lamp (red), TTL Lamp (green) and Slave- TTL (blue)
  • Beam Angle: 80°
  • Color Temperature: 5600K
  • Power: 4 x AA or Ni-MH Batteries (not included)
  • Burn Time: 150 to 250 Flashes (dependent on battery type)
  • Recycle Time: 2.8 to 1.9 Seconds (dependent on battery type)
  • Durable Polycarbonate and ABS Resin Construction
  • Dimensions: 3.4" x 5.3" x 4.4" (87 x 135 x111 mm)
  • Weight: 22.9 oz (650 g) on land w/o batteries
  • Buoyancy: -0.02 oz (-0.5 g) with batteries
  • Depth Rating: 330' (100 meters)
  • Comprehensive Owner's Manual
  • Arms and Stay:
  • Sea Arm VII-Tray with Arms
  • Updated for Greater Tightening Force, Keeps Strobe Steady
  • Corrosion Resistent Plastic Resin Construction
  • New Ball Joint Design: Firmer Tightening and Smoother Loosening
  • Stay Dimensions: 1.6" x 2.8" x 4" (40 x 70 x 135 mm)
  • Arms Dimensions: 18" (450 mm)
  • Weight: 24.5 oz (701 g)

Sea & Sea YS-D1 Strobe Package with Arm and Tray Specifications

Strobe:
----
Body Material
Polycarbonate And Abs Resin
Beam Angle
80°
Color Temperature
5600K
Guide Number
1 To 32
Batteries
4 Aa Alkaline Or Ni-Mh (Not Included)
Burn Time
Approximately 150 To 250 Flashes (Dependent On Battery Type)
Recycle Time
2.8 To 1.9 Seconds (Dependent On Battery Type)
Dimensions
3.4" X 5.3" X 4.4" (87 X 135 X111 Mm)
Weight
22.9 Oz (650 G) On Land W/O Batteries
Buoyancy
-0.02 Oz (-0.5 G) With Batteries
Light Arms:
----
Materials
Plastic Resin
Compatibility
Sea & Sea Strobes
Adjustment Points
Yes
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Ahmed A  Dear Leisurepro, I would like to know if this camera is compatible with the Canon G1X housing? I would also like to know if the YS-D1 package already includes the 100 and 120 diffuser. Thank you.
Ahmed A  Thank you very much Michael.
PENNYS A  I currently own the sea & sea dc1000 with external flash. I want to add a strobe and need to know if this is compatible with this camera? If not, please tell me what one is. Thank you Penny Gellatly 2185913058
Michael C  Yes, that flash works of a basic fiberoptic cable, which means it will work with any camera that has a small built in flash. It will work with the dc1000.
PENNYS A  Hello, I have received the strobe and now waiting for the new tray. Screw was stripped....leisure pro is sending a new one to me. I called n spoke to someone in the camera section before buying this strobe. He told me it was compatible to my camera. I am having an issue. My camera is a sealife dc1000 with the pro flash already. I wanted to buy this strobe as an addition. The problem is there is nowhere to connect the fiber optic cord to my camera as it is already preoccupied with the other fiber optic cord from the pro flash. What do I do? I am leaving April 4th on vacation and need this to work. Please HELP me? Thank you Penny Gellatly 218 591 3058 cell. Can I mail everything o you and have you put it together for me?
Shopper  Is a diffuser for the YS-D1 included in the package? Thanks.
Frank L  Diffuser sold separately. See SKU:SSDYSD1100
top
Share this item: