Seasoft  Flashlight Large Pocket with Retractor
Seasoft See all Seasoft items

Seasoft Flashlight Large Pocket with Retractor

for SeaSoft Raygun, UK Lights

SKU: SSTFP

This item is no longer available.

Seasoft : Picture 1 regular

About Seasoft Flashlight Large Pocket with Retractor

Imagine, you reach down, pull your light out and it is attached to a stainless steel line which is attached to a retractor in the bottom of the pocket. You look in that coral cave or in the octopus den and then you re-holster your light as it is magically pulled right back into the pocket. Always have a flashlight within easy reach with your SeaSoft Flashlight Pocket

All SeaSoft Flashlight Pockets have a high tension (cable force 16 lbs./7.3 kg) steel retractor mounted behind the pocket with stainless steel cable. The cable runs thru-a-grommet that connects to a quick-release buckle with a stainless steel split ring that then connects to your light. Most divers' wear the SeaSoft Flashlight Pocket on the webbing that fits over the cummerbund of their BC, but it can be mounted anywhere. Pocket is made from durable nylon covered plastic material.

The SeaSoft Flashlight Pocket comes with 2" (5 cm) of overlapping hook and loop fastener or you can choose to weave webbing through the 2" (5 cm) fixed slot. Instead of hanging a light from your BC or wearing a wrist lanyard why not choose the low profile, foolproof way to attach your light? Get a SeaSoft Flashlight Pocket! Your flashlight is mounted inside a SeaSoft Flashlight Pocket with a hidden stainless steel retractor. This retractor has a quick-release buckle at the end so you can disconnect your light at any time. The SeaSoft Flashlight Pocket fits onto virtually any webbing on your BC or anywhere else you would like to carry it. Wonderful, low profile way to carry a light!

The SeaSoft Flash Light Pocket with Retractor fits the following lights:
SeaSoft Raygun (see SKU: SSTRHWL, SSTRH and SSTRR)
Underwater Kinetics SL3, SL4 & SL6 Lights (see SKU's: UKTSL3E, UKTSL3EL2, UKTSL4E, UKTSL4, KTSL4EL1UV, UKTSL4ELUV, UKTSL4EL)

Warranty Information

This product has a limited warranty of 24 months.

https://www.seasoftscuba.com/

- -

Q&A

Questions & Answers

Questions about this item:

Shopper  If I put a intova type light in this pocket, is the retractor strong enough to hold the light in place? I know there is a smaller version of this pocket. But want to see if I could just get the bigger one to accommodate a wider variety of lights
Steve S  Yes, this will be plenty strong enough to hold an Intova light.
MARK E  It will hold it
STEVEN C  I can't speak to the light you mention, because we use ours with UK SL-4's. I remember thinking on several occasions that the retractor is a bit weak. If you mount the pocket upside down, so it is convenient to grab the light and pull it out, the retractor won't pull the light back into the pocket. I like mine on a shoulder D ring. My wife uses hers differently. When mounted open side up, the light always stays in the pocket, due to gravity.
ARTHUR C  I believe that it would be strong enough. My current flashlight is very heavy.
PHILLIP V  MInd if I ask which flashlight your currently using?
ARTHUR C  Same as in the picture. Not home to check the name, sorry.
KAREN C  What is the Luminosity?
MICHAEL T  It's pretty bright, but it's wide. The best thing about this is the price compared to what you're getting, really fantastic back up light.
MICHAEL C  This product is just a pocket with retractor for a UK light. The Uk SL4 eLed that is made to fit this pocket is 400 lumens.
Shopper  Could you please give me the internal dimensions of this flashlight pocket? Thanks.
ROBERT M  By measuring my SL4 flashlight, it is roughly 5"x2.5"x1.75".
Steve S  Although I cannot find the exact measurements of this pocket, it was made to fit UK (Underwater Kinetics) flashlight models: SL4, SL4 LED, and SL6 but will fit other similar sized flashlights such as the Intova LED Wide Beam flashlight.
JOSEPH W  Will this item work with a Tovatec Inova IS1 800 lumen light? If not, is there a similar product that will?
ROBERT R  I do not know if the IS1 800 will fit, or how heavy it is which are the two main considerations. The pocket has worked very well with the UK SL4 which is a terrific light. It performs as claimed and always amazes considering its compact size. The light is more highly focused than some of the larger beams but is also thereby more penetrating and reaches much further in clear water.
STEVEN C  I am a customer who bought this retractor for use with UK SL4 and I can't answer this question. Sorry.
Shopper  Why Did You Choose This?
Robert C  Retractor and holder for my UK SL4 eLED
JAY N  Great Flashlight and retractor - used as a back-up for my primary light
PHILIP N  Really a must have if you have the SL4 light, you always know where to find your light and when you are done, it retracts itself back into the pouch, no fumbling with clips to distract you. I wear it on every dive.
top
Share this item: