What's in the box: Sea & Sea O-ring Set for YS-250 PRO Strobe with Silicone Grease
all Sea & Sea Equipment are available in Protective Blister Packs.
Every time you open the Photographic Equipment to change film or batteries, examine the O-ring and service if necessary. Always clean and lubricate after every diving day. When in doubt about the sealing capability of an O-ring, always discard and replace. Never use a sharp or pointed object to remove an O-ring! Use Sea & Sea's O-ring remover tool (see SKU SSORR). Don't Over-Grease! Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease is not a sealant; it only protects the O-ring from abrasion. A perfectly greased O-ring looks moist and shiny.
The Sea & Sea O-ring Set for the YS-250 Pro Strobe Series is a must for the Serious Underwater Photographer. The Set includes all Diver Replaceable O-rings for the Strobe and includes a small tube of silicone Grease for lubricating. Sea & Sea recommends O-rings to be replaced annually or when you are in doubt of their integrity. O-ring Set makes a great Save-a-Dive Kit item. O-ring Set is covered by a 12 month limited warranty.
This product has a limited warranty of 12 months.