Sea & Sea O-Ring Set (3) f/ MMII/EX

SKU: SSORMM2 MFR: SS-03800

This item is no longer available.

About Sea & Sea O-Ring Set (3) f/ MMII/EX

Underwater photography equipment cannot be watertight unless the O-rings that seal it are flawless Always carry spare O-rings in your camera case O-rings are the most important components of your underwater camera system If the O-ring is lubricated, it will be elastic enough to shape itself uniformly around the channel If it is dry, there will be too much friction to allow it to reshapeitself uniformly It will not safeguard against flooding

Replacement O-rings for all Sea & Sea equipment are available in protective blister packs

Every time you open the camera to change film, examine the O-ring and service if necessary Always clean and lubricate after every diving day When in doubt about the sealing capability of an O-ring, always discard and replace Never use a sharp or pointed objectto remove an O-ring! Use the O-ring remover tool

Don't over-grease your O-rings! Too much grease attracts debris that will disrupt the seal and cause flooding Silicone grease is not a sealant; it only protects the O-ring from abrasion A perfectly greased O-ring looks moist and shiny

Warranty Information

This product has a limited warranty of 12 months.

www.seaandsea.com
(562) 498-3708

top
Share this item: