About Sea & Sea 5-Pin Sync Cord for Nikonos V Camera
Need a new or replacement Sync cord for your underwater cameras Strobe System? This Sea & Sea Sync Cord is compatible with Nikonos V, The RS and Housed SLR systems and is for TTL flash photography. Allows the photographer to create more precise images with through the lens (TTL). Improve your skills as a photographer and get better photographs with this Sea & Sea Sync Cord. Cord is not compatible with YS-60TTL.
RICHARD S
Is this compatible with DX-2G housing and YS-90 strobe? (Strobe has 5 pin connection.)
WILLIAM G
The S&S cords will fit your S&S strobes- the 5 pin connector is compatible with my Inon Strobes, it is the Nikonos type pin configuration. If the housing has the same # of pins, in the same configuration, I would think it should work... I would write your housing support and ask that question.
RICHARD S
Thanks Peggy. Yeh the strobe connection looks like it may work. I'm concerned about the housing. It does not have any pins. Just a simple round hole about the size of an pencil eraser. Does that end of the cord have pins also?
WILLIAM G
Rick, The cord has 5 pins on both sides- the larger looking end goes into the strobe, the longer looking end into the housing- it does not sound like your housing will accept this- does the housing work on fiber optic? You need to get the specs on your housing- I would ask them which cords to use...good luck-
ALLISON G
It is compatible with the YS-90 strobe. Actually it is most strobes by Sea & Sea Compatible. The housing however, I am not familiar with but most housings have the standard pin connector port. I don't think you will have an issue with it.
Angelo F
Yes it is
Roberto F
it is the cable to works with the strobe YS-D1 and the sea&sea RDX-550D housing?
Monica s
Yes, this is the cord. If you want to use in TTL mode you may need an adapter, just check your manual, but for your strobe no problem.
HARRY G
Is this compatible with YS 110a/TTL strobe?
BRIAN S
Sorry, can't help. I have a YS-90TTL, so don't know about the 110.
MICHAEL C
Absolutely. That is the setup that I have. Sometimes I use 1 - 110 sometimes dual for which I have another sync cord also bought from LeisurePro.
CARL G
just look in your strobe, if it has 5 pins then it will work.
HARRY G
Thanks Carl.
JOAN K
Yes, definitely
CARL G
guess they think I am 99.9% wrong,, not sure what the "a" is in your 110a
CARL G
I have 2 ys-110 and use this cord, I am 99,999% sure it's the same
Shopper
Is this compatible with YS 90 DX strobe?
LeisurePro S
No, you will need the 4-pin cord (product SS4PDSC) for the YS 90 DX.
Shopper
is this compatible with sea and sea motormarine III and sea and sea ys 110 strobe?