Does the Vyper display remaining air time and remaining no-deco dive time like the Cobra does?
I'm sorry I have not used a cobra.
ENG YEW L
Yes, At the lower left have side of the display it will show remaining PSI. And in the middle, it will how remaining no-deco time.
I am not familiar with the cobra, but the vyper does provide a guess on remaining times based on burn rate and its dive memory, if integrated with a tank transmitter. Make sure to carry spare batteries for both!
Yes when used with the wireless transmitter
I don't know what the Cobra does, but I have the Suunto Vyper wrist computer and the air sensor and it does display the remaining air time and no-deco dive time.
The Vyper Air does display the no-deco time. If you have the optional wireless pressure transmitter and it is enabled the Vyper Air will also display the remaining air time. It works very well most of the time. In over 100 dives with this computer, I've experienced loss of wireless signal (and therefore loss of remaining air and air-time information) probably less than five times. Always carry a backup SPG with the wireless.
Yes - it shows both remaining no-deco time and estimated air time. You obviously need the kit with the air pressure sending unit to get the air time.
You can find the full manual on the suunto web site if you want to.
Yes, it does give you this information. The user manual is available on-line at Suunto's website. Chapter 6 will walk you through the display.
If I had a 'do-over', I'd choose the integrated instead of the wireless. I had a few occassions where the transmitter link was lost in a dive, leaving me with no way to know my tank pressure, which means an aborted dive for safety reasons. I've since added a backup analogue pressure guage to my rig.
Yes, it displays both remaining NDL time and remaining air time computed from current consumption/ dive profile.
Yes, it does. The remaining air time (at current depth/consumption) and remaining no-deco time are displayed side by side. Current depth is displayed on the top of the display, and 2 smaller displays on the bottom show choice of other information (tank pressure, temperature, time, dive time, etc). I usually leave mine on tank pressure and dive time.
We have 2 of these and use our old Suunto computers as back-ups. Very happy with the Vyper Air, no complaints.
It does display the estimated air time remaining (I believe). Not sure about the deco time, but it does shop time remaining on other safety stops.