Apeks : Picture 1 regular
Apeks

Top Rated Gear
APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators

Your Price

$90.00
Buy more and save
Quantity Discount
QuantityAmount

The quantity discount will be reflected in your shopping cart

In Stock & Ready to Ship
Apeks : Picture 1 regular

About APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators

You started diving with yoke style cylinder valves, but you feel the higher cylinder pressure available with DIN cylinders will be an advantage to your style of diving. Well this kit will allow you to do just that, shed the yoke and increase bottom time with this 300 Bar (4350 psi) DIN Conversion Kit for your All APEKS Regulators. Also, Scuba divers who travel overseas will want to have a DIN adapter to convert to the tanks available at the local dive sites. The kit allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear!

DIN assembly is constructed from marine grade corrosion resistant chromed brass. Higher pressure will allow you to extend your bottom time. Most HP cylinders are made from steel, so you can also remove some of the weight from your weight system due to the lower buoyancy characteristics of the HP cylinder. DIN conversion kit comes with a plastic thread protection cap and all the components including a DIN body with hand wheel, filter and O-ring.

The APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators is commonly used for All Diving Applications, Cold Water, Recreation and more. The APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators is most used by customers who consider themselves to be a Advanced Diver among others. The APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators is popular because customers like the following qualities of the APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators: Easy To Use, Functional, Improves Diving Experience, Lightweight, Solid Construction.

APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators Features

  • APEKS 300 Bar DIN Conversion Kit:
  • Designed for All APEKS Regulators
  • Allows Regulator Use with HP Cylinders
  • Marine Grade Chromed Brass Construction
  • Increased Bottom Time
  • Less Weight on Weight System
  • Great for Traveling Divers
  • Easy to Install
  • Service Pressure: 300 bars (4350 psi)
  • Plastic Thread Protection Cap
  • Includes Filter and O-Ring

APEKS 300 Bar DIN Conversion Kit for All APEKS Regulators Customer Reviews Powered by TurnTo®

Review Summary

 
4.7

(based on 9 reviews)

100%

of respondents would recommend this to a friend.

Ratings Distribution

  • 5 Stars

     

    (7)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Most Liked Positive Review

 

Just Perfect

Fits perfectly. O-ring and filter are included. Threded plastic cap stors extra tank o-ring for others without DIN connection. Can be tightened with deeply inserted 7mm Allan Wrench. Nice!

VS

Most Liked Negative Review

 

DIN kit works as advertised

"Lost" the old DIN wheel to a corroded DIN-yoke converter. Adequate replacement.

Reviewed by 9 customers

Displaying reviews 1-5

Back to top

Previous | Next »

 
5.0

I give it an A+

By

I purchased this so I could change my new Apeks regs over to DIN like the rest of my gear.

 
5.0

You may trust it - it's Apeks

By

Although technically the installion is very simple process, it still requires some special tools to be used and some experience. I'd highly recommend the installation to be perfromed by a trained professional because this is the equipment you rely upon when underwater.

 
5.0

Great product!

By

Very prompt delivery without any problems - as usually.

 
3.0

DIN kit works as advertised

By

"Lost" the old DIN wheel to a corroded DIN-yoke converter. Adequate replacement.

 
5.0

Very useful device to DIN conversion

By

Very useful device to convert your regulator to DIN

Displaying reviews 1-5

Back to top

Previous | Next »

Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Shopper  Why Did You Choose This?
RICHARD M  apex are easy change over, with this anyone can do it, making hi pres steal tanks with 300 bar makes for more air in smaller tank and less weight needed
Shopper  Hello, I am traveling to Egypt and want to use my Apeks Flight Reg set. Is this what I need to convert it? is it easy to change back and forth?
RICHARD M  It depends on the first stage you have. I know it fits 200 atx as will as xtx. 100 and 50s as will
JOHN C  I used this to convert my ATX50 from yoke to DIN - it is very easy to do. If you keep your yoke, it is easy to convert back. This should work on any Apeks first stage regulator.
JAMES W  Yes, this should work. I have one on my Apeks regulator that I switch out with my yoke fitting, depending on my situation. It is easy to do, just make sure you have the right tools, line up the threads carefully, and do not over tighten the DIN converter into the 1st stage or you could damage your regulator.
KEN W  I believe all Apeks regs use the same converter to switch from yoke to DIN. It is very easy to switch.
JAMES C  Yes I would think so - if your regs are Apeks. I converted my yoke set up to DIN. All my equipment (tanks and all) are DIN. When I travel I take a yoke adapter to work with most rental tanks. I hope this answered your question
ANDREEA C  Hi, you don't need this for Egypt - they are well used to US divers who all (or most) have yoke-type regulators. All dive operators and dive boats have "nuts" that they insert into the valve on the tank-head to convert it to a yoke-friendly tank. I've been going to Egypt at least once a year every year for the past 7 years and they ALWAYS have these nuts available. Just show them your reg and they'll know what to do. The converter you are considering, apart from being quite expensive, is not easy to change back and forth - you need specialized tools and you really need to know what you're doing. In essence, you would take off the entire yoke-portion of your first stage and replace it with this DIN converter. I use them to convert yoke-type regs to permanent tech-style DIN regulators. So, bottom line, you don't need it just for a trip to Egypt...
CHARLES F  yes its very easy
DAVID Z  The DIN is easy to swap back And forth. JUST keep it tight
NEIL H  The change out is pretty easy. You'll need a large adjustable wrench to remove the yoke attachment. Remove it carefully to ensure o rings stay put. I have the sealed (cold water) first stage, but assume they work the same. Have a great, safe trip.
TODD C  Here is the adapter once you convert the reg to DIN so that you can use yoke tanks: http://www.leisurepro.com/p-aqudrc/aqua-din-to-yoke-regulator-converter
TODD C  Yes it is what you want. You can convert it yourself if you have the tools, or have your local shop convert it. Once you use DIN, I think you will always want to use it. As far as converting, no, it's not that simple to convert back, but you can carry an adapter that makes it simple. The adapter is also available here on LP.
KEVIN F  Please contact us via email so we may clarify the question you would like answered. Please email: info@leisurepro.com
Shopper  will this work on an older atx 200?
MICHAEL S  Yes it will.
Frank L  Works on all Apeks Regulators.
FERNANDO M  Yes , I had that regulator and work
RICHARD M  Yes. If fact I own a atx 200 my wife had the xtx 200 and it works for both
ALVARO S  Yes it will. Google Apeks Atx 200, you will get an exploded view schematic showing it.
top
Share this item: