Scubapro : Picture 1 regular

Single Bladder

Scubapro

Scubapro X-Tek Horseshoe Wing Bladders

SKU: SCPXTHW MFR: 22.194.010

Your Price

$399.00
Buy more and save
Quantity Discount
QuantityAmount

The quantity discount will be reflected in your shopping cart

In Stock & Ready to Ship
Scubapro : Picture 1 regular

About Scubapro X-Tek Horseshoe Wing Bladders

Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion.

The Scubapro X-Tek Horseshoe (HS) Wing comes in 3 models, either a 60 lbs (27 kg) Single or Dual Bladder High Lift Air Cell or a 90 lbs (40.8 kg) Dual Bladder that Provides Unprecedented Buoyancy Control regardless of your diving position. The HS is manufactured using a Strong and Durable 1680-Denier Ballistic Nylon Outer Shell guaranteeing a High Quality External Bladder with Maximum Abrasion Resistance. The Inner Bladder(s) is/are made of Durable 420-Denier Nylon for Superior Puncture Resistance compared to just a Polyurethane Bladder found on other Buoyancy Devises.

Outer Shell has a Zippered Closure for Easy Access to the Internal Bladder(s), 5 Durable Grommets and 4 Reinforced Cylinder Band Slots for attachment to Harness, Back-Plate and Cylinders. Tek HS Wing Single Bladder comes equipped with 1 Large Lower Left Front Overpressure Relief Valve with Manual Pull Dump Cord or 2 on Dual Bladder Models, Large Lower Left and Right Front Overpressure Relief Valves with Manual Pull Dump Cords and 1 Scubapro Balanced Power Inflator Mechanism on Single Bladder Model and 2 on Dual Bladder Models, for perfect Buoyancy Control.

Scubapro's Balanced Power Inflator(s) provides a High inflation speed, especially at depth. Inflator has different shaped Inflation and Purge Buttons for easy use even in extremely low light or murky water conditions. Inflator(s) is/are also equipped with a Rapid Pull Dump Mechanism with Cable Pull for easy Deflation of the Air Bladder(s). All 3 Models come equipped with Bungee-Systems for Minimum Drag and a Low Profile in tight environment diving conditions. The HS Wings also come with Low Pressure Quick Connect Hose(s) and an Owner's Manual.

Warranty Information

This product has a limited warranty of 12 months.

http://www.scubapro.com

Scubapro X-Tek Horseshoe Wing Bladders Features

  • Scubapro X-Tek Horseshoe Wing Bladder
  • Wing Provides Unprecedented Buoyancy Control
  • Outer Shell: Strong and Durable 1680-Denier Ballistic Nylon
  • Outer Shell: Maximum Abrasion Resistance
  • Bladder(s): Durable 420-Denier Nylon
  • Bladder(s): Superior Puncture Resistance
  • Zippered Closure for Easy Access to the Internal Bladder(s),
  • 5 Durable Grommets, 4 Reinforced Cylinder Band Slots for Attachment to Harness, Back-Plate and Cylinders
  • 1 Large Lower Left Front Overpressure Relief Valve with Manual Pull Dump Cord (Single Bladder)
  • Large Lower Left and Right Front Overpressure Relief Valves with Manual Pull Dump Cords (Dual Bladder)
  • Scubapro's Balanced Power Inflator(s) Mechanism for Perfect Buoyancy Control
  • High Inflation Speed, Especially at Depth
  • Different Shaped Inflation and Purge Buttons for Easy ID Even in Extremely Low Light or Murky Water Conditions
  • Rapid Pull Dump Mechanism with Cable Pull for Easy Deflation
  • Includes 3/8" Thread LP Hose(s) and Owner's Manual
  • Lift Capacities of 60 or 90 lbs (27 or 40.8 kg)
  • Bungee-System for Minimum Drag and Low Profile (Twin wing only)
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Mathieu B  Would any back plate work with these wings ? I will be diving doubles (LP95 or LP98) and the larger model (90 lbs lift) seems very nice. I will be taking deco classes and maybe eventually trimix.
Steve S  Yes, most backplates will work with this wing. ScubaPro does sell an X-Tek backplate though.
Alex K  Mathieu, The short answer is MOST backplate and harness systems will work. I've used this wing with the Diverite and Hollis backplates without any problems. It will also obviously work with a ScubaPro setup and based on the slotting I've seen; the Halcyon backplates as well. Cheers, Alex
MARCUS W  If you have the chance, you should try out a similar sized rig before you buy it to see if you like it. I bought the 60lbs lift wing and i like it. Has more lift than i need and i am fairly tall, diving double steel 130s plus deco bottles. I am sure the 90lbs version is fine as well, just dont know if I would need it. Double steel 130s are 20lbs negative tops (going towards neutral once close to empty), and i have a few pounds positive from my drysuit, so 60 is more than i need.
Al D  does this BC come with everything needed to dive ? What are the pros and Cons using this compared to jacket style BCs? keeping in mind I don't have many dives in and I will want to use this for wreck diving etc...at some point.
COPIOUS C  only thing i don't like about it is that on top of the water..it pitches me forward a little...other than that its a great bcd.
Al D  Thanks that is very helpful.
JUNMO H  No, if you want to buy b/p style, it will have to buy some other goods as back plate, harness at least.
JERRID M  This BC is for someone that is interested in double tank diving. If your using steel tanks than you will probably not need the integrated weight pockets. If you get the single bladder then expect to get the pockets and a single tank adapter. The bladders are interchangeable so if you start out with single tank dives and later on decide to upgrade to doubles then it's as easy as removing a couple screws and throwing the other bladder on there. note that this item is the bladder only. You will also need the x-tech harness as well.
Shopper  Hi There, I was wondering if you could help me with what I would need for a complete single setup, and if this combination would work? - Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate - Scubapro X-Tek Single Tank Adapter 133 - Scubapro X-Tek Horseshoe Wing Bladders Many thanks, Dave
Marilyn S  That combination will work. You may however, want to consider a wing with less lift: Scubapro X-Tek Donut Wing Single Tank SKU: SCPXTDWS. 60 lbs is overkill for singles in my opinion and will create unnecessary drag. And since you are looking for a single setup I'm assuming you're not going to have an unbalanced load from stages for example, so any advantage a horseshoe wing would provide in that situation is not really relevant.
MARCUS W  Dave, only dove it once so far, but had no issues, worked well. I don't know about singles though. Like most bladders its wide enough to accomodate doubles (which is what i dive), singles might work, but could be less steady. Believe leisurepro sells donut bladders specifically. for singles though, you may want to. check those out.
top
Share this item: