Scubapro : Picture 1 thumbnail Scubapro : Picture 2 thumbnail

About Scubapro X-Tek Donut Wing Single Tank

Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion.

Scubapro's X-Tek Donut Wing Provides Unprecedented Buoyancy Control regardless of your diving position. Wing is manufactured using a Strong and Durable 1680-Denier Ballistic Nylon Outer Shell guaranteeing a High Quality External Bladder with Maximum Abrasion Resistance. The Inner Bladder is made of Durable 420-Denier Nylon for Superior Puncture Resistance compared to just a Polyurethane Bladder found on other Buoyancy Devises.

Outer Shell has a Zippered Closure for Easy Access to the Internal Bladder, 5 Durable Grommets and 4 Reinforced Cylinder Band Slots for attachment to Harness, Back-Plate and Cylinders. Donut Wing comes equipped with a Large Lower Left Front Overpressure Relief Valve with Manual Pull Dump Cord and Scubapro's Balanced Power Inflator Mechanism for perfect Buoyancy Control. Scubapro's Balanced Power Inflator provides a High inflation speed, especially at depth. Inflator has different shaped Inflation and Purge Buttons for easy use even in extremely low light or murky water conditions. Inflator is also equipped with a Rapid Pull Dump Mechanism with Cable Pull for easy Deflation of the Air Bladder. The X-Tek Donut Wing comes with a 3/8" threaded Low Pressure Hose with Quick-Connect fitting and an Owner's Manual. Wing is available with Lift Capacities of 30 and 40 lbs (13.6 and 18 kg).

Scubapro X-Tek Donut Wing Single Tank Features

  • Scubapro X-Tek Donut Wing Single Tank
  • Wing Provides Unprecedented Buoyancy Control
  • Outer Shell: Strong and Durable 1680-Denier Ballistic Nylon
  • Outer Shell: Maximum Abrasion Resistance
  • Bladder: Durable 420-Denier Nylon
  • Bladder: Superior Puncture Resistance
  • Zippered Closure for Easy Access to the Internal Bladder,
  • 5 Durable Grommets, 4 Reinforced Cylinder Band Slots for Attachment to Harness, Back-Plate and Cylinders
  • Large Lower Left Front Overpressure Relief Valve with Manual Pull Dump Cord
  • Scubapro's Balanced Power Inflator Mechanism for Perfect Buoyancy Control
  • High Inflation Speed, Especially at Depth
  • Different Shaped Inflation and Purge Buttons for Easy ID Even in Extremely Low Light or Murky Water Conditions
  • Rapid Pull Dump Mechanism with Cable Pull for Easy Deflation
  • Includes 3/8" Thread LP Hose and Owner's Manual
  • Lift Capacities of 30 and 40 lbs (13.6 and 18 kg)

Scubapro X-Tek Donut Wing Single Tank Specifications

Bc Body
Back Inflator
Buoyancy Bag
30 Or 40 Lbs (13.6 Or 18 Kg)
Valves
Dump/Over Pressure Relief/Inflator Pull Dump
Oral Inflator
Balanced Power Inflator
Materials
Outer Shell: 1680-Denier Ballistic Nylon, Bladder: 420-Denier Nylon
Weight [with packaging]
30 Lbs: 3.1 lb,
40 Lbs: 3.35 lb
Mfr #
SKU
SCPXTDWS

X-Tek Donut Wing Single Tank Customer Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews
Scubapro X-Tek Donut Wing Single Tank
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 1 customers found this review helpful)

 
5.0

Scubapro donut wing

By PIdiver

from Las Vegas NV

About Me Advanced

Pros

  • Comfortable
  • Durable

Cons

    Best Uses

    • Recreation

    Comments about Scubapro X-Tek Donut Wing Single Tank:

    After a using Scubapro X tek donut wings on about 20 dives the spring I will ay that these wings have proved to be very efficient at evenly distributing and effortlessly releasing air. My wife was struggling with air getting trapped in the corners and folds of her old BCD making buoyancy erratic. Since changing to the Scubapro backplate and donut wing she has had a breaktrough to easy and controllable neutral buoyancy. She uses a 30 lb and I have the same Scubapro Xtek 40 lb donut wing. The wings are streamlined, well made and have a tough cover protecting the bladders. Typical rugged and simple Scubapro products. Highly recommended.

    • Diving Type:
    • Drift Diving, Night Diving, Open Water Diving

    Comment on this review

    Displaying review 1

    Back to top

    Q&A

    Questions & Answers Powered by TurnTo®

    Questions about this item:

    Shopper  Why Did You Choose This?
    BRIAN H  There is a fairly close comparison now with about 5-manufacturers of wings and bladders, I went with Scuba pro to complete my whole system with their products. Price was close also , I am brand loyal .
    Chris M  Do you still need the single tank adapter kit for this wing even if its for one tank? I want the form tek system with aluminum back plate and 40#'s of lift.
    ?? ?  yes!! it need the single tank adapter kit to fit the form tek system and this Scubapro X-Tek Donut Wing Single Tank and the tank(only one tank on the back not side mount) !!
    Rosie G  Besides a harness and plate, what else is needed to mount a single tank on this BC?
    Taylor F  You need the single tank adapter if you plan on using a single tank. Doubles that are magnified together can be attached directly to the backplate. There is also a storage pack that's a little pocket between the actual plate and your back that adds a lot to comfort and storage capabilities that's a good add on too
    top
    Share this item: