Scubapro Mark 2 Plus Regulator DIN, First Stage Only

Scubapro
SKU: SCPM2PD MFR: 10.060.030

About Scubapro Mark 2 Plus Regulator DIN, First Stage Only

Classic downstream piston- The Mark 2 Plus is the best example of bulletproof reliability and trouble-free, minimum maintenance regulators. The classic downstream piston configuration is the simplest mechanism that exists to control the pressure drop from a tank to feed the second stage. The classic downstream valve is the first choice of diving centers and rental facilities worldwide for warm and moderate water temperatures. Classic downstream valves are particularly noted for their legendary safety and reliability. When in use, the downstream valve opens in the same direction as the incoming air flow. To close the valve and stop the air flow, a spring counteracts the force of the incoming air. Therefore, a certain inhalation effort is always required to overcome the spring tension and open the valve.

This first stage epitomizes reliability and simplicity. Its standard Flow-By Piston design is ideal for divers who don't want to get bogged down with an overwhelming amount of bits and pieces, but still want the peace of mind that comes with a sound piece of equipment. This first stage is equipped with SCUBAPRO's Thermal Insulating System (TIS), which will keep your first stage functioning properly, even in frigid water. The MK2 has one high-pressure port and four low-pressure ports. The first stage body is manufactured from marine-grade chrome plated brass, weighs 17.1 oz (485 g) and is covered by a limited lifetime warranty. Regulator does not include Low Pressure Hose.

Warranty Information

This product has a limited lifetime warranty.

www.scubapro.com
(800) 468-2822

Scubapro Mark 2 Plus Regulator DIN, First Stage Only Features

  • Flow -By Piston Design
  • Marine Grade Chromed Brass Body and Components
  • Compact and Lightweight
  • Weight: 17.1 oz (485 g)
  • 4 LP Ports
  • 1 HP Port
  • Fail-Safe Downstream Valve
  • LP Hose Not Included
  • Limited Lifetime Warranty

Scubapro Mark 2 Plus Regulator DIN, First Stage Only Specifications

1'St Stage Type
Non-Balanced Flow-By Piston
Lp Ports
4
Hp Ports
1
Materials
Chromed Brass
Total Weight
17.1 Oz (485 G)
Weight [with packaging]
1.25 lb
Mfr #
SKU
SCPM2PD
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Alex G  Will it accommodate wireless uwateck transmitter (Luna, Sol) alone with regulator hose setup without adapter? If not. Is a 6in hp floating hose is the only option? Thanks
JACQUES G  I do not know. I use mine for dry suit inflation and not for breathing...
Shopper  The description states this 1st stage has the TIS 'thermal insulating system' for cold water use. So it must be good for cold water diving, Yes?
BARAK B  Not Sure, I only used it in the Red Sea (Sub Tropical) Google "scubapro mk2 cold water" and look at Scubabaord answer… I would say depends on how cold the water is
Shopper  Can I use this regulator in water 50 degrees or less?
Frank L  NOT recommended for cold water. You should be looking for a balanced diaphragm, or an environmentally sealed first stage for cold water.
top
Share this item: