Scuba Pro Mark 11 Regulator, First Stage Only, DIN

SKU: SCPM11D MFR: 10.708.300
Scubapro : Picture 1 thumbnail Scubapro : Picture 2 thumbnail

About Scuba Pro Mark 11 Regulator, First Stage Only, DIN

The Mk11 First Stage Regulator is the perfect choice for the recreational diver who wants the advantage of a diaphragm first stage for use in temperate waters. Diaphragm-based first stages are environmentally sealed so that water cannot enter the inner mechanism. Bearing in mind that regulators generate temperatures as low as minus 22°F (-5.5°C) due to the incredibly fast moving air and the pressure drop involved, it is imperative that sensitive moving metal parts avoid contact with extremely cold water or debris. Therefore, diaphragm first stages have been the favored choice of cold-water divers and those working in contaminated or muddy water. SCUBAPRO diaphragm first stages feature balanced technology and are packed with patented features resulting in ultra fast flow to the second stage on demand and a fantastic overall performance.

The MK11 first stage's streamline body is constructed of machined marine-grade chromed brass. The MK11 has a balanced diaphragm to offer you peace of mind with its smooth breathing mechanisms and maximum performance that don't diminish as your tank's air pressure changes. This first stage is available with a DIN configuration. This first stage comes standard with the Thermal Insulating System (TIS), which keeps your first stage from freezing up and malfunctioning in cold water conditions. Additionally, its over-balanced diaphragm first stage design gives you better breathing performance at greater depths. First-Stage Regulator is equipped with two HP and four LP Ports. Two of the LP Ports are High Flow Ports (HFP) for easier breathing on demanding dives. Regulator weighs 16.6 oz (470 g) and is covered by a limited lifetime warranty. Regulator does not include Low Pressure Hose.

Warranty Information

This product has a limited lifetime warranty.
(800) 468-2822

Scuba Pro Mark 11 Regulator, First Stage Only, DIN Features

  • Balanced Diaphragm 1st Stage Design
  • Chrome Plated Brass Body
  • Multiple LP Ports, 2 HFP, 2 SFP
  • 2 HP Ports
  • Compact Streamline
  • Environmentally Sealed
  • Cold Water: Anti-Freeze Protection & Dry Chamber
  • Weight: 16.6 oz (470 g)
  • LP Hose Not Included
  • Limited Lifetime Warranty

Scuba Pro Mark 11 Regulator, First Stage Only, DIN Specifications

1'St Stage Type
Balance Diaphragm
Lp Ports
4, Two High Flow, Two Standard
Hp Ports
Body: Marine-Grade Chromed Brass
Total Weight
16.6 Oz (470 G)
Weight [with packaging]
1.25 lb

Questions & Answers Powered by TurnTo®

Questions about this item:

Alex G  What is a maximum service pressure in bar/psi? Thanks
KEVIN F  yoke -200 bar (3336 psi) DIN -300 bar (4351 psi)
Alex G  Will it accommodate wireless uwateck transmitter (Luna, Sol) alone with regulator hose setup without adapter? If not. Is a 6in hp floating hose is the only option? Thanks
Ben T  Being that the HP ports are angled. You can accommodate a transmitter and it will not interfere with any other hoses.
Share this item: