About Scubapro Scubapro Gauge
The Scubapro 2 Gauge Console is a lightweight and compact console with a durable impact resistant boot that accommodates the pressure and depth gauges. The Scubapro 2 Gauge Console is great as a primary or back-up instrument for recreational or more experienced divers. This compact all-in-one console has recessed instrument compartments to protect the instruments face. The boot is equipped with lanyard attachment eyelet to keep the instruments close at hand and not damaging the marine environment.
The oil filled depth gauge has a readout from 0 to 45 meters of depth with bright orange indicator marks at 3 and 6 meters to indicate decompression and safety stop requirements if needed. The gauge is equipped with a maximum depth indicator (MDI). The MDI needle will mark your deepest depth reached on a dive. This feature is helpful when logging dive information providing key data for repetitive dives. The depth gauge has a luminous dial for easy reading in night or low light conditions.
The submersible pressure gauge (SPG) has a readout from 0 to 300 bars in 50 bar numerical increments. Like the depth gauge the SPG has a luminous dial for easy reading. The pressure gauge comes with a 7/16" threaded 87.5cm (34.5") high-pressure hose. Both instruments measure 55mm (1.96") in diameter. The console comes with an instrument instruction.
Warranty Information
This product has a limited warranty of 12 months.
https://www.scubapro.com/scubapro-warranty
800-467-2822
Scubapro Scubapro Gauge Features
- Scubapro 2 Gauge Console, Metric:
- Lightweight and Compact Console
- Durable Impact Resistant Boot
- Primary or Back-Up Instrument for Recreational or More-Experienced Divers
- Compact All-In-One Console
- Recessed Instrument Compartments, Protect Instruments Face
- Luminous Dials for Easy-Reading in Night or Low Light Conditions
- Lanyard Attachment Brackets
- Instrument Diameters: 55mm (1.96")
- Complete w/Instrument Instructions
- Depth Gauge:
- Oil Filled Depth Gauge
- Readout from 0 to 45m
- Bright Orange Indicator Marks at 3m & 6m for Decompression & Safety Stop Requirements
- Maximum Depth Indicator (MDI)
- MDI: Helps in Planning & Logging Repetitive Dives
- Pressure Gauge:
- Readout from 0 to 300 bars
- Numerical Increments: 50, 100, 150, 200, 250, & 300 bars
- 7/16" Threaded 87.5cm (34.5") High Pressure Hose