Subsalve USA Vehicle Recover System Vehicle Recovery System 8800 lbs

Subsalve USA Vehicle Recover System Vehicle Recovery System 8800 lbs

Your Price:

$1879.95

$2779.00 $899.05 (32%)

SKU: SBSVRS4000 Special Order Add to wish list Notify Me

Subsalve USA Vehicle Recover System Vehicle Recovery System 8800 lbs Features

What's in the box: Subsalve USA Vehicle Recover System with Carry Bags

The VRS 2000 and VRS 4000 are the first and only Self-Contained Underwater Vehicle Recovery System available today. The US Coast Guard asked SUBSALVE to create a System to aid Recovery of Downed Helicopters. The result is the VRS 4000-Helo, these 3 Recover Systems are described below:

VRS 2000 and 4000: Using State-of-the-Art design materials and manufacturing processes, this All-Purpose System is designed to be Portable for Rapid Deployment, and is the result of an 18-year Evolutionary Process drawing from hundreds of product applications, combined with Technological Advancement. SUBSALVE USA Engineers and Technicians have worked with the Commercial and Public Safety Diving Communities to Develop-and-Refine this System, not just on the Drawing-Board, but in the Water on Recoveries.

Each SUBSALVE USA Lift Bag leaves SUBSALVE's manufacturing facility equipped with all necessary Hardware and is Ready-for-Immediate Use. Each SUBSALVE USA Lift Bag is tested prior to shipping. The Lift Bag Assemblies folds into a Heavy-Duty Zippered Carrying Case with Nylon Handles and an Adjustable Shoulder Strap. The Lift Bags are Built-to-Last made from High Strength Heavy-Duty Ballistic-Rated Urethane Coated Nylon Fabric. This Specially-Coated Fabric is High Strength, Very Resistant to Abrasion, Not Affected by most Petrochemicals and UV Resistant. The VRS 2000 and 4000 are used by over 250 Domestic and 50 Worldwide Public Safety Dive Teams.

The VRS 2000 System features include: two 2000 lb (909 kg) Enclosed Flotation Bags equipped with a Pocket to contain an 80 cu ft Aluminum Scuba Cylinder. The Air Cylinder is connected to the Lift Bag with a Scuba Yoke and Hose Assembly with a One-Way Check Valve to allow for Easy-Tank Changes while Preventing-any-Loss of Air from the Bag. The Attachment-Design includes 2 Stainless Steel Lift Rings on the Top and 2 on the Bottom of the Bag, allowing the Lift Bag-to-be-Rigged either Flat or Upright. The Bottom Lift Rings are each equipped with a 3' (7.6 cm) length of 1/4" Galvanized Proof Coil Chain with a Stainless Steel Snap Carabineer on the end With the Lift Rings spaced at 40" (101.6 cm) apart and the Carabineer on the end of the Chain, attachment to the Front-and-Rear Bumper or Shock Brackets of most Vehicles is Quick-and-Easy. This design also enable the Bags to be Rigged to Cradle the Car by connecting the two 3' (7.6 cm) Chains together to pass under the vehicle. The Lift Bags are equipped with a Pressure Relief Valve in each Corner to prevent Blow-Up and also to allow the Diver to Manually Vent the Bag from any corner. A 3/4" Brass Ball Valve is located at the Top-Center of each Lift Bag to allow for Rapid Deflation. All Components Pack into two Carrying Cases that are 51" x 20" (129 5 x 50 8 cm) and weigh about 65 lbs (29.55 kg).

The VRS 4000-Helo a System of two 4,500 lb (2045.45 kg) Capacity Enclosed Floatation Bags with an Integral Inflation System, designed for Aircraft that frequently Fly-Over-Water. The Bags have Pocket to contain an 80 cu ft Aluminum Scuba Cylinder. Manually Operated Inflation Valve Inflates Bags in approximately 2-minutes. The Air Cylinder is connected to the Lift Bag with a Scuba Yoke and Hose Assembly with a One-Way Check Valve to allow for Easy-Tank Changes while Preventing-any-Loss of Air from the Bag. The Attachment-Design includes 2 Stainless Steel Lift Rings on the Top and 1 on the Bottom of the Bag with High Strength Snap Hooks for Rapid Attachment.

All the VRS 4000-Helo Components pack into 2 Velcro-Closure Valises that measure (L x H x W) 51" x 20" x 10" (129.5 x 50.8 x 25.4 cm) and weigh approximately 65 lbs (29.55 kg). The Lift Bags are Built-to-Last made from High Strength Heavy-Duty Ballistic-Rated Urethane Coated Nylon Fabric. This Specially-Coated Fabric is High Strength, Very Resistant to Abrasion, Not Affected by most Petrochemicals and UV Resistant. The VRS 2000, VRS 4000 and the VRS 4000-Helo are made in the U.S.A and are covered by a 12 month limited warranty.

Key Features

  • Subsalve USA Vehicle Recover Systems:
  • Designed for Vehicle or Helicopter Recoveries
  • Self-Contained Underwater Vehicle/Helo Recovery System
  • Complete with Carry Bags
  • All VRS Models: Pockets for 80 cu ft Scuba Cylinders
  • All VRS Models: Equipped with Scuba Yoke and Hose with One-Way Check Valve
  • VRS Material: High Strength Heavy-Duty Ballistic-Rated Urethane Coated Nylon Fabric
  • Specially-Coated Fabric: High Strength, Very Resistant to Abrasion
  • Fabric: Not Affected by Most Petrochemicals and UV Resistant
  • Equipped with All Necessary Hardware and Ready-for-Immediate Use
  • Each SUBSALVE USA Lift Bag is Tested Prior to Shipping
  • Made in the U.S.A.
  • 1 Year Limited Warranty
  • VRS 2000 and 4000:
  • State-of-the-Art Design Materials
  • All-Purpose System: Portable for Rapid Deployment
  • Lift Bag Assemblies Fold into Heavy-Duty Zippered Carrying Case
  • Carry Case: Equipped with Nylon Handles and Adjustable Shoulder Strap
  • VRS 2000 and 4000 are used by over 250 Domestic and 50 Worldwide Public Safety Dive Teams
  • Two, 2000 lb (909 kg) Enclosed Flotation Bags
  • 2 Stainless Steel Lift Rings On-Top of Bag and 2 on Bottom of Bag
  • Lift Rings Allowing Lift Bag-to-be-Rigged either Flat or Upright
  • Bottom Lift Rings: Equipped with 3' (7.6 cm) Length of 1/4" Galvanized Proof Coil Chain with Stainless Steel Snap Carabineer
  • Lift Rings Spaced 40" (101.6 cm) Apart
  • Lift Rings Allow Attachment to Front-and-Rear Bumper or Shock Brackets of Most Vehicles
  • Quick-and-Easy Rigging Design
  • Pressure Relief Valve (PRV) in Each Corner to Prevent Blow-Up
  • PRV: Allow Diver to Manually Vent Bag from Any Corner
  • 3/4" Brass Ball Valve for Rapid Deflation
  • Carrying Case Dimensions: 51" x 20" (129.5 x 50.8 cm)
  • System Weight: Approximately 65 lbs (29.55 kg)
  • VRS 4000-Helo:
  • Two 4,500 lb (2045.45 kg) Capacity Enclosed Floatation Bags
  • Integral Inflation System
  • Designed for Aircraft that Frequently Fly-Over-Water
  • Manually Operated Inflation Valve
  • Inflation Valve: Inflates Bags in Approximately 2-Minutes
  • 2 Stainless Steel Lift Rings on Top of Bag
  • 1 Stainless Steel Lift Ring on Bottom of Bag
  • High Strength Snap Hooks for Rapid Attachment
  • 2 Velcro-Closure Valises
  • Valise Dimensions: (L x H x W) 51" x 20" x 10" (129.5 x 50.8 x 25.4 cm)

Warranty Information

This product has a limited warranty of 12 months.

www.subsalve.com
(800) 466-6962