The Subsalve USA Professional Lift Bag began with a One-of-a-Kind Assignment from the US Navy to develop a Floatation Device that would Dependably-withstand-Particularly-Abusive-Conditions. Subsalve developed the 5-ton Deep Ocean Lift Bag which had Unprecedented-Strength, Low Elasticity and Superior Resistance to Abrasion and Chemical Attack. This Bag is now Subslave's Standard Professional Lift Bag Design.
These Open-Bottom, Balloon-Shaped Bags with a Single Attachment-Point are easy to use in Construction, Heavy and Light Salvage, and many Offshore Tasks. The Professional Lift Bags are manufactured from Heavy-Duty, Ballistic-Rated Nylon Fabric Coated with Urethane. This specially-coated fabric is: High in Strength, Very-Resistant to Abrasion, Most Petrochemicals and UV. All SUBSALVE USA Professional Lift Bags are equipped with Easy-to-Operate Fill and Dump Valves on the top of the Lift Bag.
Each Bag leaves Subslave's manufacturing facility equipped with all necessary Hardware and is Ready-for-Immediate Use. Each SUBSALVE USA Lift Bag is tested prior to shipping, and must meet rigorous U.S Department of Defense Requirements Lift Bags Rated for below 2-Tons (1814.4 kg) have Multiple Nylon Lift Straps sewn directly to the bottom of the Lift Bag which bares the load and has a Safe-Working Ratio of 6:1. They are fitted with Subslave's Plunger Dump Valve which provides Air Control with a Push-Button Knob at the Top of the Bag and a Lanyard at the Bottom of the Bag as well as a 1/4" NPT Inflation Port. Vent Air from above, beside or below Lifting Bag to achieve desired ascent rate.
The Lift Bags Rated above 2-Tons (1814.4 kg) are designed with Replaceable Heavy-Duty Nylon Webbing Lift Harness fabricated into the Skin of the Bag which bares the load and also has a Safe Working Ratio of 6:1; They are fitted with a 3/4" NPT Inflation Port and a 3/4" Bronze Ball Valve for deflation. All Bags are Similar-in-Shape to an Inverse Water Droplet at the Moment-of-Breakaway; this unique design provides Maximum Lifting Capacity with the Least Total Bag Weight. It also provides an even distribution of Stress Over-the-Fabric Surface.
The Subsalve USA Professional Lift Bags are available 8 Lift Capacities from 1,100 lbs (500 kg) up to 7,7000 lbs (3,500 kg). The Lift Capacities are as follows:
PF-1000: 1,100 lbs (500 kg)
PF-2000: 2,200 lbs (1,000 kg)
PF-4000: 4,400 lbs (2,000 kg), PF-6000: 6,600 lbs (3,000 kg)
PF-12000: 12,200 lbs (5,500 kg)
PF-20000: 22,000 lbs (10,000 kg)
PF-40000: 44,000 lbs (20,000 kg)
PF-70000: 77,000 (35,000 kg)
The Subsalve USA Professional Lift Bags measure as follows (Diameter x Overall Height):
PF-1000: 35" x 56" (90 x 144 cm)
PF-2000: 44" x 60" (113 x 162 cm)
PF-4000: 54" x 94" (138 x 241 cm)
PF-6000: 61" x 108" (156 x 277 cm)
PF-12000: 70" x 130" (179 x 333 cm)
PF-20000: 93" x 146" (238 x 410 cm)
PF-40000: 120" x 201 cm)
PF-70000: 144" x 258" (360 c 677 cm)
The Subsalve USA Professional Lift Bags are made in the U.S.A and are covered by a 12 month limited warranty.
This product has a limited warranty of 12 months.