Easy to adjust--but only before you slide it into the track. You have to remove it from the track if you want to change the width. Other than that, very easy to use and a great design!
Best option I could find
By
diverchet
The ability to fold down (or up) when not in use is what I like best. Adjusting for various tank sizes requires sliding bracket out of mounting rail. In my case I will have to remove the rail to slide out the front 2 brackets for size adjustments. Not that difficult.
Roll Control System is the complete accessory system for diving, fishing and boating. The system starts with a Track System that enables you to mount either and Aluminum, PVC or Molded Plastic Track (see SKU's: RCSTA81, RCSTA97), to your boat gunnels, vans, and truck beds or personnel watercraft. Once you have the basic track you can then mount any of the many brackets available to hold Scuba cylinders, fishing rods, rope cleats and much more.
Durable polypropylene adjustable tank brackets (two-piece). Slide the brackets into aluminum or molded track to safely transport your tanks (vertically) to your dive destination. Conveniently fold the brackets down when they are not in use when maximum deck or cargo space is important. When needed just flip them back up for instant tank storage. Tank Bracket fits all tank sizes. Not for use with Roll Control Tank Handles. Tank Brackets are sold in sets of two. (Track Railing, not included).
Warranty Information
This product has a limited warranty of 12 months.
- -
Roll-Control Adjustable Tank Bracket, Set of 2 (TA-80) Features
Roll-Control Adjustable Tank Bracket:
Designed for Roll Control System
Requires Aluminum, PVC or Molded Plastic Track (see SKU's: RCSTA81, RCSTA97)
Complete Accessory System for Scuba Diving, Fishing and Boating
Non Corrosive Polypropylene Material
Rugged Construction
Quickly Slides in Place Where You Need Them
Easy to Install
Conveniently Fold Brackets Down when Not-in-Use
Foldable Design: Maximum Deck or Cargo Space w/Needed
JEFFREY P
what are the dimensions of the brackets?
DAVID M
I need to know what dimensions you are looking for. The question is too vague.
JEFFREY P
Thanx . I need the width, 9 or 12 inches wide. I need 9’s to fit 4 ranks on my rack
DAVID M
The TA80 will hold steel 72’s (6.69”) and any of the aluminum cylinders that are 7.25”. Just be careful of the height that they are mounted for some of the shorter cylinders.
FRANK D
About 1 1/2" thick they expand to fit a lot of tanks mine are 80's they fold down out of the way when not in use but you may want to get the holding bracket it is 4' long and will hold 5 brackets that is what is on my boat
F Dardi
JEFFREY P
Thanx Frank. Are they 9 or 12 inches wide? These are replacements for a 36 in rack. I’m looking for 9 in wide brackets.
Bernardo I
Hi! which is the length of the bracket base? how many brackets can you mount on the 48" track?
thanks!!
FRANK D
I can put 5 Tanks up with this Bracket
Rob S
I want to mount these in my pick up truck. Is there a band that holds the tank in securely?
FRANK D
These hold the tanks in place great and I do not think your truck would be roll from side to side like a boat
JUAN E
There is no band, but I have never had them come loose even in the roughest of seas.
You can always drill the tips and add bungee
BRANDON S
No, what you see is what you get. The clamps are the only thing holding the tanks.
IAN E
No. I use a bungee cord for added safety in my boat.
sonny l
I need tank holder for 4 tanks 12 liters. How much space do I need for the mounting , thanks ?
FREDDY D
Each tank need aprox. 10 inches. I have mine mounted on 24 inch mounts... 2 on each
Shopper
Hi, is this a complete set , or do we have to buy further accessories to fit the brackets to the boats?
JAMES O
You need a rail with end caps to insert the roll control tank holders in. The rail is mounted to the boat and the roll control tank holders slide into the rail. The mounting rails are available in several lengths to fit you needs. I recommend you buy and extra roll control bracket or two because one of your dive buddies will certainly break the holder by jamming a 100 cu ft tank into one that has been set up for a 72. I have never had a tank fall out of the roll control during very heavy seas. Buy the way, the correct way to use these brackets is to have one arm of the bracket vertical and one horizontal. The tank is then inserted against the horizontal arm and the vertical lowered to embrace the tank. The brackets can be adjusted to accommodate various tanks. I suggest adjusting them on the loose side.
HERB O
It's been a couple of years since I bought it, but I recall it was a whole set with everything needed. Works great.
BILL B
You have to buy accessories and you have to buy the aluminum track and install if you want the system to function best. The "set" as pictured is two plastic type of material constructed individual tank holders. The aluminum rail the tank holders are shown attached to must purchased.
WILLIAM M
You also need the track railing and the track end cap stop kit.