The ZEAGLE's LAZER is based on the very popular Stiletto BC. The LAZER however is Cut, Shaped and Sized for the Female Form. It features a Vest that is Scooped-in-the-Lower-Rear to accommodate Shorter-Torsos and Wider-Hips. It is a Rugged-Full-Featured but Lightweight BC, designed for women who may do both Warm-and-Temperate Water Diving but don't need the Twin Tank Capability or Higher-Lift of ZEAGLE's Heavy-Duty BC's. The LAZER's Extra Durable Reinforced 1000-Denier Nylon Bladder material gives an Extra-Level of protection against Abrasion or Punctures in Close-Environments like the Edge of a Coral Reef or Wreck. It has Sufficient Lift and Weight Capacity for most Average-Sized-Divers to use in their Local Environments, yet Packs-Easily into a Lightweight Travel System.
The LAZER features 5-Stainless Steel D-Rings and ZEAGLE's PFS (Personal Fit System) Sizing. The PFS allows for a Custom-Fit and lets you change out specific sections of the BC. Adjusting the BC for a Perfect Fit, the LAZER has Torso Adjustable Shoulders Straps an Adjustable Sternum and Waist Straps all equipped with Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing. The LAZER has Adjustable Elastic Waist Panels and a Lumbar Pad that is Permanently-Mounted in the rear of the vest section.
The LAZER Back Inflation BC provides 35lbs (15.88kg) of Lift in a Low-Profile Retracting Bladder. BC is also equipped with ZEAGLE's 30lb (13.6kg) Capacity Ripcord Weight System and a 16lb (7.26kg) Capacity Rear Trim Weight System both excepting Hard Block and Soft Weights. Storage is provided with 2-Zippered Utility Pockets. Buoyancy Control and Trim is Easy with the 2-Lower Rear Overpressure Relief/Pull Dump Valves and OCTO-Z Breathable Inflator. BC weighs 6.9lbs (3.13kg) and comes with an Owner's Manual. The LAZER is ideal for the woman who wants a Lightweight but Rugged System, for both Travel-and-Local-Diving that doesn't compromise on features.
ZEAGLE's regulators are US made, built under strict controls for quality in ZEAGLE's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with ZEAGLE.
The OCTO-Z Inflator replaces the conventional BC power inflator and second stage octopus by combining the functions of both into a single unit. When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind.
When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus! Combining your inflator devise (that you use on every dive) with your Octopus Regulator assures your ability to react properly when an out-of-air emergency occurs. Be a safe diver with the OCTO-Z Breathable Inflator.
The OCTO-Z is a Dependable Downstream Demand Valve Design Breathable Inflator. The OCTO-Z has a Balanced Inflator Valve Design and is manufactured from Brass, Flexible and ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber. The Breathable Inflator weighs 8 oz (213 g) without the hose, providing a Lightweight and Compact Alternative to having both a Standard Inflator Mechanism and a Separate Octopus Regulator.
The High-Flow Inflator Hose is 27" (69 cm) in length with 3/8" Threads. The OCTO-Z is also equipped with a Threaded Coupling that allows you to attach the end of the BC Corrugated Hose to a Garden Hose for Easy and Effective Rinsing of the BCD's Air Bladder. This feature also allows you to disconnect the OCTO-Z for storage with your Primary Regulator. The combining of the Alternate Air Source and Inflator Mechanism also eliminates a Hose and Streamlines your Profile when diving. The OCTO-Z comes with a Comprehensive Owner's Manual. The LAZER BCD and the OCTO-Z are covered by a Limited Lifetime Warranty.