What's in the box: BCD, LP Quick Disconnect Hose, Zeagle Octo-Z Alternate Air Source and Owner Manuals
The ZEAGLE Ranger LTD BCD now comes standard in Smoke Gray, (all black available as well) a good looking, rich color that compliments any suit or other gear color combination. The Shoulder is designed with the new Super Duty Airlock Buckle that will Swivel to Adjust the Harness to the Body's Contour to eliminate Binding-and-Restriction-of-Movement at the Chest-and-Underarm Areas. With the addition of Harness-Type Webbing and a new Threading Arrangement the diver can easily add more D-Rings and other Accessories conveniently on the shoulder. This feature will now allow the Technical-and-Accessory minded diver to further Set-Up their BC to what their needs for the type of diving they are doing. ZEAGLE has also added a Right-Hand Shoulder Dump with a Pull Knob located conveniently on the inside edge of the right shoulder pad. The Dump Valve acts also as an additional Safety Overpressure Valve.
The ZEAGLE Ranger LTD is equipped with Personal Fit System (PFS) Modular Sizing. The PFS allows for a Custom-Fit and lets you change out specific sections of the BC. The ZEAGLE Ranger LTD also has Adjustable Elastic Waist Panels and a Lumbar Pad that is Permanently-Mounted in the rear of the vest section. The BC is made from Heavily-Reinforced 1050-Denier Ballistic Nylon, has 2-Zippered Utility Pockets, 4 Stainless Steel D-Rings on the Shoulders (two adjustable), 2 Stainless Steel D-Rings on Vest so there's plenty of Storage Space and Accessory Attachment Points for all your gear.
This Back Inflation BC provides 44lbs (20kg) of Lift and comes equipped with ZEAGLE's Ripcord Weight System. The Ripcord System has a Block of Soft Weight Capacity of 30lbs (13.6kg) of Releasable Weight and an additional Capacity of 20lbs (9kg) Rear Trim Weight that is Non-Releasable. Adjusting the BC for a perfect fit the Ranger LTD has Torso Adjustable Shoulders Straps an Adjustable Sternum and Waist Straps all equipped with Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing.
The Ranger LTD can accommodate Single or Twin Tanks with 11" (27.8cm) Grommets for the Twin Cylinder Mounting. Buoyancy Control and Trim is Easy with the 2-Lower Rear, Right Shoulder Overpressure Relief/Pull Dump Valves and OCTO-Z Breathable/Inflator Alternate Air Source. The BC has a Dry Weight of 9.5lbs (4.3kg) and comes with an Owner's Manual.
ZEAGLE's regulators are US made, built under strict controls for quality in ZEAGLE's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with ZEAGLE.
The OCTO-Z Inflator replaces the conventional BC power inflator and second stage octopus by combining the functions of both into a single unit. When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind.
When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus! Combining your inflator devise (that you use on every dive) with your Octopus Regulator assures your ability to react properly when an out-of-air emergency occurs. Be a safe diver with the OCTO-Z Breathable Inflator.
The OCTO-Z is a Dependable Downstream Demand Valve Design Breathable Inflator. The OCTO-Z has a Balanced Inflator Valve Design and is manufactured from Brass, Flexible and ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber. The Breathable Inflator weighs 8 oz (213 g) without the hose, providing a Lightweight and Compact Alternative to having both a Standard Inflator Mechanism and a Separate Octopus Regulator.
The High-Flow Inflator Hose is 27" (69 cm) in length with 3/8" Threads. The OCTO-Z is also equipped with a Threaded Coupling that allows you to attach the end of the BC Corrugated Hose to a Garden Hose for Easy and Effective Rinsing of the BCD's Air Bladder. This feature also allows you to disconnect the OCTO-Z for storage with your Primary Regulator. The combining of the Alternate Air Source and Inflator Mechanism also eliminates a Hose and Streamlines your Profile when diving. The OCTO-Z comes with a Comprehensive Owner's Manual. The Ranger LTD BCD and the OCTO-Z are covered by a Limited Lifetime Warranty.