Tusa Package #3

Tusa Package #3 Features

What's in the box: 1'st and 2'nd Stage Regulators, Alternate Air Source/Inflator, Low Pressure Hoses, Computer Console with Compass and HP Hose, BCD with LP Hose Owner Manuals and Ball Cap

The RS-680 Regulator delivers Superior Performance and Quality in a Compact Lightweight Design. The R-600 mated with a newly developed S-80 Second Stage further pushes the engineering and performance envelope. The Compact Chromed Marine Brass Balanced Diaphragm R-600 First Stage is Incredibly-Small and Weighs only 22.2 oz (630g). The R-600 is configured with 2 HP and 4 LP Ports. The Balanced Diaphragm, First Stage Regulator is inherently Environmentally Sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance.

The S-80 Second Stage offers the following features: S.E.A. - Sequential Exhaust Assist

The Sequential Exhaust Assist (S.E.A.) is a Second Stage design featuring a Dual Exhaust System. The S.E.A. System consists of an Enlarged-Primary and an Auxiliary Exhaust. The Auxiliary Exhaust, located on top of the S-80 Elliptical Case, works in union with the Primary to Significantly Decrease Exhalation Resistance. Exhalation Resistance Directly-Affects the Diver's Natural Breathing Cycle, Reducing this Resistance the diver Breathes-More-Naturally and Comfortably Reducing Respiration Rate and Air Consumption.

Venturi Adjustment
The Venturi Adjustment Lever on the S-80 allows the Regulator to Power-Assist the Diver when underwater utilizing the Natural-Venturi Effect. The diver may also Adjust-the-Lever to Prevent Free Flow such as on a Surface Swim.

Moisture Exchange Plate
The Second Stage has a Moisture Exchange Plate that Captures-Condensation produced by Inhalation and Exhalation Efforts. This Condensation Increases the Humidity of the Air Breathed and helps to reduce that "Dry Mouth" sensation often experienced while diving.

Breathing Resistance Adjustment Control
The Breathing Resistance Adjustment Control on the S-80 allows the diver to Adjust the Flow of Air according to their needs. The Easy-Adjust Multiple-Click Knob allows you to Quickly-and-Finely Tune Breathing Resistance. The Ortho-Consciously Mouthpiece further enhances the Comfort of Bite, Fit, and Stability. Even with a Light-Bite, a High Level of Stability is achieved so there is no Fatigue from long periods of usage. For Optimum Performance and Comfort, a 29" (74 cm) Swivel Hose is fitted between the S-80 Second Stage and the R-600 First Stage. The Swivel-Joint allows Flexibility of the Hose to Eliminate Hose Tension. The S-80 is a Reliable Down-Stream Demand Valve Design.

TUSA Dual-Air Alternate Combo Inflator
When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was Buoyancy Control. Once you start diving for fun you use your Buoyancy Control Devise constantly throughout the dive. Your Octopus or Alternate Air Source Devise on the other hand is never used unless there is an Emergency Out-of-Air Situation. Reacting properly in an Out of Air Situation can make the difference between a Safe Dive and a Tragedy. If your Alternate Air Source and your BCD Inflator Devise are one and the same you will always know where to find it in an emergency.

In an effort to continually meet the needs of today's divers, TUSA is expanding their regulator line with the Inflator Regulator. It's a downstream backup regulator that also provides you with easy-to-operate buoyancy control. The Inflator Regulator is positioned at the end of the buoyancy compensator hose, the ideal location for quick, efficient use. Because you use it as your power inflator, you always know where it's located. Plus, the Inflator Regulator cuts down on hose clutter because you use the same hose to supply both the power inflator and the backup regulator. The regulator features a dependable down-stream demand valve mechanism. The Regulator's Pre-Tuned System is housed in a Carbon Fiber and Techno-Polymer Case for Strength and Durability. The Demand Valve is Chrome Plated Brass with a Stainless Steel Spring and a Silicone Rubber Diaphragm and Exhaust Valve. The Dual-Air comes with a 3/8" Threaded 27.56" (70 cm) High-Flow Low-Pressure Hose. The Primary and Dual-Air Regulators comes with Owner's Manuals and are covered by a Limited Lifetime Warranty.

The Pro-Plus 2.1 offers Large, Easy-to-Read Alphanumeric Displays and Color Coded Graphs where Green means "Go," Yellow means "Caution" and Red means "Stop." There are user settable Audible and Visual Alarms. Alarms include: High 02, High and Maximum P02, Turn-Around Time Tank Pressure, Maximum Depth, Elapsed Dive Time, Maximum Nitrogen and Dive Time Remaining. The Computer has Graphic Indicators for Air Time Remaining, Oxygen Loading, No Decompression Time Remaining, 02 Time Remaining and Ascent Rate.

The Computer can be Manually Turned-On or Water Activated. The CR2 Battery is User-Replaceable at any time without the loss of data. The Computer Displays Temperature and Time of Day, although suitable for sport divers the Computer it can be used as a Computer for Air/Nitrox or Depth Gauge to 330' (100 meters). It offers both Tim-to-Fly and De-Saturation Countdowns. It Automatically Adjusts for Altitude and for Salt or Fresh Water. The Computers Algorithm is a Modified Haldanean / DSAT (Diving Science and Technology) Database. The Computer has an On-Unit Log Capacity of 24 Dives, Backlighting, Side Scan Compass, Quick Disconnect Hose; Owner's Manual and is covered by a 2 Year Limited warranty.

The Evolution Platina BC is Full Featured Jacket. The Evolution Platina offers TUSA's Advanced Weight Loading System (A.W.L.S.), the Independent Harness System, and the Ultimate Stabilizing Harness. The Evolution Platina has TUSA's Waist Support System allowing for Customizable Shoulder/Harness Fit. Rear Trim Pockets combine with the A.W.L.S. to optimally balance the weight load. The Jacket has a weight capacity from 24 to 28 lbs (10.9 to 12.7 kg) with 16 to 20 lbs (7.26 to 9 kg) Dump-Able. TUSA's Ultimate Stabilizing Harness relieves tank roll and delivers an amazing fit. The U.S.H. securely holds the air tank in place with optimally placed rails and brings the tank closer to the body increasing tank control while reducing weight. The Waist Support System significantly enhances comfort and fit by dispersing the weight load around the hips. The W.S.S. integrates the adjustable shoulder harness system with the rear stabilizing plate and cummerbund to effectively unload the hips while ensuring a snug fit. BCD provides 24 to 44 lbs (10.7 to 19.9 kg) of Lift, comes with a Owner's Manual and is covered by a 12 month limited warranty. Included in the package is a Leisure Pro Ball Cap.

Key Features

  • Tusa Package #3:
  • Complete Life Support Package
  • Regulator, Octopus/Inflator, BCD, Air Integrated Computer Console with Compass and Ball Cap!
  • Limited Lifetime Warranty on Regulators
  • 2 Year Limited warranty on Computer Console
  • 1 Year Limited Warranty on BCD and Compass
  • Owner's Manuals: Regulators BCD and Computer
  • Regulator:
  • TUSA RS-680 Regulator:
  • Superior Performance and Quality
  • First Stage:
  • TUSA R-600 Regulator:
  • Balanced Diaphragm
  • Ultra-Compact and Lightweight, 22.2 oz (630g)
  • Chromed Marine Brass Construction
  • 2 HP and 4 LP Ports
  • Environmentally Sealed
  • Keeps Contaminate Out: Salt, Sand, Chlorine or Pool Acids
  • Less Maintenance
  • Second Stage:
  • TUSA S-80 Regulator:
  • Reliable Downstream Demand Valve Design
  • Elliptical Low-Profile Case
  • S.E.A. - Sequential Exhaust Assist Technology (Patent Pending)
  • S.E.A.: Dual Exhaust System for Easy Exhalation Effort
  • Venturi Adjustment Lever Reduced Free-Flow
  • Built-In Moisture Exchange Plate, No "Dry Mouth"
  • Universal Swivel Joint for Maximum Comfort
  • Breathing Resistance Adjustment Control
  • Ortho-Consciously Designed Mouthpiece
  • Hose: 29" (74 cm) with 3/8" Threads
  • Alternate Air Source Inflator:
  • TUSA Dual-Air Alternate Combo Inflator:
  • Increased Safety in Out-of-Air Emergencies
  • Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
  • Simple, Yet Reliable Classic Downstream Demand Valve
  • Fixed Venturi Initiated Vacuum Assist Flow Vane
  • One-Hand Operation for Instinctive and Simple Operation
  • One-Button Purge Function
  • Single Hose Configuration
  • Pre-Tuned System
  • Carbon Fiber and Techno-Polymer Case
  • Strong and Durable Design
  • Demand Valve: Chrome Plated Brass with Stainless Steel Spring
  • Silicone Rubber Diaphragm and Exhaust Valve
  • 3/8" Threaded 27.56" (70 cm) High-Flow Low-Pressure Hose
  • Air Integrated Computer Console with Compass:
  • Oceanic Pro-Plus 2.1 Computer Console:
  • Large, Easy-to-Read Alphanumeric Displays
  • Color Coded Graphs:
    Green Means "Go"
    Yellow Means "Caution"
    Red Means "Stop"
  • User Settable Audible and Visual Alarms:
    High 02
    High and Maximum P02
    Turn-Around Time Tank Pressure
    Maximum Depth
    Elapsed Dive Time
    Maximum Nitrogen and Dive Time Remaining
  • Graphic Indicators: Air Time Remaining
    Oxygen Loading
    No Decompression Time Remaining
    02 Time Remaining
    Ascent Rate
  • Manually Turned-On or Water Activated
  • Power: User-Replaceable CR2 Battery
  • "Hot Swap" Battery Function
  • Temperature and Time of Day
  • Operational Modes: Air, Nitrox or Gauge
  • Operational Depth: 330' (100 meters)
  • Tim-to-Fly and De-Saturation Countdowns
  • Automatically Adjusts for Altitude and Salt or Fresh Water
  • Algorithm: Modified Haldanean / DSAT (Diving Science and Technology) Database
  • On-Unit Log Capacity of 24 Dives
  • Backlighting
  • Quick Disconnect 7/16" Threaded Hose
  • Buoyancy Contro Devise:
  • TUSA Evolution Platina BCD:
  • Full Featured Jacket Style
  • TUSA's Advanced Weight Loading System (A.W.L.S.)
  • A.W.L.S.: Optimally Balance Weight Load
  • Dump-Able Weight Capacity: 16 to 20 lbs (7.26 to 9 kg)
  • Trim Non-Dump-Able Weight Capacity: 8 lbs (3.63 kg)
  • Independent Harness System
  • Ultimate Stabilizing Harness: Relieves Tank Roll and Delivers Amazing Fit
  • Waist Support System (W.S.S.): Customizable Shoulder/Harness Fit
  • W.S.S.: Integrates Adjustable Shoulder Harness with Rear Stabilizing Plate and Cummerbund
  • W.S.S.: Effectively Unload Hips while Ensuring Snug Fit
  • Lift: 24 to 44 lbs (10.7 to 19.9 kg)
  • Ball Cap:
  • Leisure Pro Quality Hat
  • Protects Head from Heat and Sun
  • UV Protection
  • Traditional Red and White Dive Flag Logo
  • One Size Fits Most