The 5 Oceans Back Inflation BCD is a lightweight, weighing 7.5 lbs (3.4 kg), packs flat for travel to the tropics and, at the same time, supplies plenty of lift. The BCC's integrated weight capacity and range of adjustment allows it to be worn in cold water over thick wetsuits or dry suits. The 5 Oceans air cell uses a combination of BioFlex material and bungee cords to maintain the streamline profile, yet allows for 40 lbs (18 kg) of lift. BioFlex - a unique "living fabric" that stretches, flexes and conforms to the body. BioFlex is an extraordinary fabric, which stretches, fully inflated up to 30% over conventional nylon or polyurethane BC materials.
Durable fadeless 1,000 Denier Cordura construction. Exterior abrasion points of the 5 Oceans are covered with this new "Fadeless" material- tough stuff that will hold up to years of extreme diving and keep that "new look" longer. Aeris Quick Lock & Release (QLR) Integrated Weight System that can accommodate up to 20 lbs (9 kg) is standard equipment on the 5 Oceans along with 10 lbs (4 .5 kg) in rear trim pockets. Versatile power inflation/deflation with lower pull-dump control, easy to use drop-down pocket , strategically placed stainless steel grommets for adding accessories, a dual-adjustable sternum strap for added stability and comfort, carry handle, tank positioning strap, carabineer with multiple attachment points all make this one great BCD.
The AERIS A300 XT diving computer is a unique hybrid dive computer. The pressure gauge and computer module have more in common than merely sharing space in a rubber boot. When you push a button for backlighting, your pressure gauge illuminates along with your computer. Low air warning trigger the dive computer's audible & flashing LED alarm for increased safety. The Computer is powered by AERIS' Dual Algorithm allowing you to choose the decompression algorithm that best suits your diving needs without compromising safety. Pelagic DSAT Based on DSAT (POWELL / SPENCER) data consisting primarily of No Deco, multilevel, repetitive dives at sea level. Pelagic Z+ Based on BUHLMANN ZHL-16C data consisting primarily of repetitive Deco dives at altitude. This dual Algorithm provides the ability to choose a liberal (DSAT) or conservative (Z+) algorithm for repetitive recreational diving. It also provides an appropriate algorithm (Z+) for repetitive deep and planned deco diving and provides the ability to adjust to more closely match a buddy's profile.
Computer is powered by a user replaceable CR2450 Lithium Battery, has a 24 dive on-unit log book, and is water or manually activated. Console is equipped with a Pressure Gauge that reads pressure from 0 to 5,000 psi. The pressure gauge has a low air indicator in red at the 500psi level for safety and comes equipped with a 7/16" High Pressure Hose.
With the AERIS side reading compass, the diver is able to hold the compass level and still be able to easily read the headings through the cut out window on the side. Quick responding and accurate compass large ratchet bezel, high visibility lubber line, direct and reciprocal index points, luminescent dial for ease of reading in low light or night diving conditions. Computer, Pressure Gauge and Compass are housed in a durable console boot with an attachment point for a clip or lanyard.
The AT 600 is a High Performance First Stage with Environmental Seal. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. With the AT 600 there is a Secondary Environmental Diaphragm Membrane that seals off the spring chamber keeping the first stage completely sealed off from the environment adding a second layer of corrosion resistance. The first stage has 4 Low Pressure Ports (LP) and 1 High Pressure Port (HP) and is Nitrox compatible to 40% out of the box.
The pneumatically balanced demand valve of the Ion Second Stage along with a highly responsive design allows this regulator to provide a high volume of airflow with even the slightest inhalation effort, making it seem nearly effortless to breathe at any depth. All in a second stage barely wider than the mouthpiece. The ION is AERIS' smallest and most streamlined second stage ever with an outer ring diameter of only 2.3" (5.8 cm). The ION's second stage is made from an ABS/Polycarbonate composite blend of materials making the ION both extremely rugged and lightweight, reducing jaw fatigue on extended dives. The extremely lightweight cover ring is machined from a solid piece of aircraft aluminum, and then hard anodized to prevent corrosion.
The ION features a pneumatically balanced valve that maintains a preferred breathing resistance throughout the dive. Set it once and the ION automatically adjusts to make breathing as easy at 100' (30 meters) as it is at 30' (10 meters). The ION features a 30" (76.2 cm) Hose with Swivel to reduce jaw fatigue. The ION's unique deflector vane and housing design diverts airflow from the valve directly to the mouthpiece, producing smooth venturi-assisted inhalation. Adding to the ION's rugged durability, an oversized integrated purge button is utilized to eliminate the possibility of free-flow caused by trapped sand. To further reduce jaw fatigue, the ION features a patented orthodontic mouthpiece with high density bite tabs designed to accommodate the natural overbite of the human jaw. Regulator weighs 34.4 oz (974.14g).
The Aeris A2 Octopus' Simple, yet Effective Design is ideal for divers who Demand Durability. The Bright Yellow Cover and Hose allows you or your buddy to Easily Spot the A2 if it is ever needed. Dependable Downstream Demand Valve Design and Housing is made from an ABS/Polycarbonate Composite Blend of materials making the A2 both Extremely Rugged and Lightweight, weighing 6 oz (170 g). The A2 has a Small Profile with a Front Diameter of 2.9" (7.4 cm), and comes with a 36" (91.4 cm) MaxFlex. Like all Aeris Products the BCD, Computer, Regulator and Octopus come with an Owner Manuals and a 24 month limited warranty.
Your Regulator System is the Heart of you Dive Equipment. Keep your Regulators and Expensive Instruments separate from the rest of the gear. Bag has Sturdy Top Grab Carry Handle, is made from Durable Nylon throughout, and is equipped with a Dual Slider Corrosion Resistant Zipper. The Bag measures 12" x 12" x 3" (30.5 x 30.5 x 7.6 cm) with a volume of 432 cubic inches (7 liters). Bag comes with Leisure Pro Logo and Character, with phone and web contact info. Bag is covered by a 24 month limited warranty.