Omer : Picture 1 regular
Omer : Picture 1 thumbnail Omer : Picture 2 thumbnail Omer : Picture 3 thumbnail

Omer America Shafts 6.5mm (0.26")

Starting at

Buy more and save
Quantity Discount

The quantity discount will be reflected in your shopping cart

Out of Stock
Omer : Picture 1 regular

About Omer America Shafts 6.5mm (0.26")

Having the right gear and spares when out on either a day or multi-day spear fishing hunt are critical to not being skunked. Having the right hardware can make the difference when landing a trophy fish. The Omer Shaft with integrating three shark-fins in place of traditional notches. The profile of the shark fins is thin with the end resulting in better hydrodynamics and penetration through the fish. Each shark fin has a hole to attach the shooting line on. The shafts come in a natural satin finish and come standard with a point design that increases penetration. The Omer America 6.5mm (0.26") Stainless Steel Point Shaft is constructed from AISI 17.4ph stainless steel. The shaft tip is a flopper-style, designed for maximum penetration and a secure hold on the catch. As soon as the shaft penetrates the flopper keeps the shaft from slipping off. Shaft is available in multiple lengths of 130 cm, 140 cm and 150 cm (51.2", 55.1" and 59") depending on which length gun to be used.

Warranty Information

This product has a limited warranty of 24 months.

Omer America Shafts 6.5mm (0.26") Features

  • Omer America Shafts
  • Don't Get Skunked w/Damaged or Broken Gear
  • Having the Right Hardware: Can Make Difference Landing Trophy Fish
  • Diameter: 6.5mm (0.26")
  • Integrating Three Shark-Fins Design, in Place of Traditional Notches
  • Shark Fin Profile: Thin, Results, Better Hydrodynamics & Penetration Thru-Fish
  • Hole in Each Shark Fin for Shooting Line Attachment
  • Natural Satin Finish AISI 17.4ph Stainless Steel
  • Flopper-Style, Designed for Maximum Penetration & Secure Hold on Catch
  • Flopper Keeps Shaft from Slipping
  • Available in Multiple Lengths: 130 cm, 140 cm and 150 cm (51.2", 55.1" and 59")
  • Great Save-a-Dive Kit Item

Questions & Answers Powered by TurnTo®

Questions about this item:

Shopper  Does it fit my Omersub Cayman Aluminum Speargun 100cm? I want to try shark fin shaft but my one is closed Muzzle.
Ben T  Will not work with a closed muzzle.
Shopper  what is thread size?
Steve S  This shaft is not threaded. This shaft has the tip already ground onto this.
karl m  I think that this shaft does not come in a threaded model. You will have to look at another brand for that. If you have an Omer gun you will need a euro shaft (rounded notch just like in the picture). If you have a gun that uses american shaft (square notch) then you will have to choose one that will fit. Most threaded shafts are 6mm or 7mm threads (7mm is used on 8mm thick shafts, but be sure to read the spec's). They also make adaptors from 6mm to 7mm. If you go to Omer website they have a product catalog you can download with all the specs, then email the supplier with your specs you need and all the info about your gun and they should be able to get you what you need.
JASON R  This shaft isn't threaded.
GREGGORY K  On this particular shaft, there is no thread-on tip.
faisal a  does it fit omer cayman roller ?
karl m  Yes, if your shaft that came with cayman roller is Euro design (meaning it has a curved cut out for the trigger mechanism. The American shafts have a notch cut out for the trigger mechanism. Your gun can use the 6.5mm to 7 mm shafts. Also, I put rubber from an old pole spear on the metal wishbones becuase the top of the ET track was getting scratched or you can change it to spectrac/dyneema line wishbones. I also dunk my gun in freash water because it will corrode. I also had to reseal the aluminum center section because it was filling with water. Other than that it has been a great gun and very acurate. Good luck, Charlie (karl)
JASON R  I use a 130 in a Cayman 110 ET
Share this item: