About OMS 60 lbs. (27.2 kg) Lift - Chemically Resistant Wing
Pull down the zipper of the outer cover of the OMS BC and you will see 1000 denier Nylon fabric backed with Polyurethane (PU) and on the Chemically Resistant BC's 5-6 oz. (141.75-170.1g) PU front and back. This thicker PU coating helps prevent abrasion and increases puncture resistance of the outer bag. Most competitors use only 0.5 oz. (14.2 g) or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks. Housed inside the outer cover OMS uses a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12mm of TPU. Most of OMS's competitors use only a thin plastic film bladder that is more susceptible to damage. There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS BC Wing is delivered. The 60 lbs. (27.2 kg) lift Wing comes equipped with retraction bands to provide a low drag, low profile, and rapid deflation unit. The retractor bands are handy when diving in overhead, cave and wreck diving environments. They incorporate a pull dump located at the driver's side lower left and an OMS inflator hose exiting the center of the BC, tank side, and provide quality without compromise. OMS power inflator mechanism comes with a low pressure 3/8" threaded quick-disconnect (QD) hose. This BC has been redesigned to meet the stringent requirements of Public Safety Divers (PSD) and Military divers around the world with regard to diving either in polluted water or HAZMAT conditions. New materials added to prevent adsorption of toxic liquids and undesirable substances. This makes the BC easy to decontaminate. The wing comes with an owner's manual.
Warranty Information
This product has a limited warranty of 12 months.
845-692-3600
OMS 60 lbs. (27.2 kg) Lift - Chemically Resistant Wing Features
- OMS Chemically Resistant Wing:
- Designed to Meet Stringent Requirements of Public Safety Divers (PSD) & Military
- For Polluted Water or HAZMAT Conditions
- Materials Added to Prevent Adsorption of Toxic Liquids & Undesirable Substances
- Outer Shell:
1000 Denier Nylon Fabric Backed with Polyurethane (PU)
Chemically Resistant 5-6 oz. (141.75-170.1g) PU Front & Back
Thicker PU Coating Helps Prevent Abrasion & Increases Puncture Resistance - Inner Bladder:
200-Denier Nylon Fabric
Backed with 0.12mm Thermoplastic Urethane (TPU)
Ultrasonic Welded Seams - Lift Capacity: 60 lbs. (27.2 kg)
- Donut-Style Wing: Allows Easy Movement of Air Side-to-Side
- Durable Elastomeric Silicone Rubber Bungee Tubing:
Must for Increasing Deflation Rate
Create Lower Profile, Less Drag
Handy when Diving Overhead, Cave & Wreck Environments - OMS Power Inflator
- 3/8" Threaded Low Pressure Quick-Disconnect Hose
- Upper & Lower: Overpressure Relief/Pull Dump Valves
- Zipper Access to Internal Bladder
- Interior Backing for Zipper: Provides Protect for Bladder
- Dual Cylinder Band Slots with Mounting Webbing Reinforcement
- 6-Stainless Steel Grommets
- Owner's Manual