OMS 60 lb. Lift Single Bladder

closeout OMS 60 lb. Lift Single Bladder

OMS 60 lb. Lift Single Bladder Features

Pull down the zipper of the outer cover of the OMS+ BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz of Thermoplastic Polyurethane (TPU) This thicker TPU coating helps prevent abrasion and increases puncture resistance Most competitors use only 1/2 oz or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with 12 mm of TPU Most of our competitors use only a thin plastic film bladder that is more susceptible to damage There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS+ BC is delivered The 60 lb lift non-retraction band BC's are made from the same superior materials as the banded BC's They incorporate a pull dump located at the driver's side lower left and an inflator hose exiting the center of the BC, tank side, and provide quality without compromise

Key Features

  • Outer Cover 1000 Denier Nylon Fabric Backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU)
  • Bladder 200 Denier Nylon Fabric Backed with .12 mm of TPU
  • 60 lb Lift
  • Pull Dump
  • OMS Inflator
  • Dual Cam Band Slots

Warranty Information

This product has a limited warranty of 12 months.

www.omsdive.com
(845) 692-3600

Q&A