Pull down the zipper of the outer cover of the OMS BC and you will see 1000 denier Nylon fabric backed with Polyurethane (PU) and on the Chemically Resistant BC's 5-6 oz. (141.75-170.1g) PU front and back. This thicker PU coating helps prevent abrasion and increases puncture resistance of the outer bag. Most competitors use only 0.5 oz (14.2g) or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks. Housed inside the outer cover OMS uses a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU. Most of OMS's competitors use only a thin plastic film bladder that is more susceptible to damage. There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS BC Wing is delivered. The 45 lbs (20.4 kg) lift Wing comes equipped with retraction bands to provide a low drag, low profile, and rapid deflation unit. The retractor bands are handy when diving in overhead, cave and wreck diving environments. They incorporate a pull dump located at the driver's side lower left and an OMS inflator hose exiting the center of the BC, tank side, and provide quality without compromise. OMS power inflator mechanism comes with a low pressure 3/8" threaded quick-disconnect (QD) hose. This BC has been redesigned to meet the stringent requirements of Public Safety Divers (PSD) and Military divers around the world with regard to diving either in polluted water or HAZMAT conditions. New materials added to prevent adsorption of toxic liquids and undesirable substances. This makes the BC easy to decontaminate. The wing comes with an owner's manual and is covered by a 12 month limited warranty.
This product has a limited warranty of 12 months.