Due to the Northeast Blizzard, UPS has suspended their operations in the area. All orders placed now will ship on Wednesday. Stay Safe.Dismiss this Message

About OMS Isolation Manifold for 3/4" Valve Thread

When you are setting up a set of doubles versatility is the first thing that should come to mind Tying up a set of cylinders to be dedicated as doubles leaves no room for versatility OMS knows this and has designed their Manifolds to allow you use of your cylinders in as many configurations you want The OMS Isolator Manifold for ?" Threaded Cylinders is suitable for tanks that are 6 9to 8 0" in diameter, when configured as doubles You can also remove the Isolator valve and with the two 803 Valves and V812 Right and Left Plugs set them up as independent single cylinders You can also use them on any ?" threaded cylinder you may have Use them as Stage Bottle Valves if you like The system can also facilitate the use of the OMS V811 Right or left H-Valve increasing the versatility even further Want even more versatility, get some V115 Yoke Adapters and you can go back and forth with DIN or Yoke Regulators, now that's Versatile

Warranty Information

This product has a limited warranty of 12 months.

www.omsdive.com
(845) 692-3600

OMS Isolation Manifold for 3/4" Valve Thread Features

  • 300 bar compatible
  • Aircraft Grade Chromed Brass Construction
  • Modular Design
  • Versatile Valve System
  • Oxygen Compatible

Isolation Manifold for 3/4" Valve Thread Customer Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews
OMS Isolation Manifold for 3/4" Valve Thread
 
3.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 3 customers

Sort by

Displaying reviews 1-3

Back to top

 
1.0

Constantly breaking

By Fish out of water

from NYC, NY

About Me Advanced

Pros

    Cons

    • Poor Construction

    Best Uses

    • Cold Water
    • Professional

    Comments about OMS Isolation Manifold for 3/4" Valve Thread:

    It is amazing how down hill this company has gone. I bought this manifold for both my sets of 120 cu ft HP doubles and they BOTH are constantly popping leaks. Besides the money I wasted buying them, I have paid to have both of them rebuilt (at different shops as well) and after a couple of dives it the same result - just from a different joint. The bad perception that OMS products have earned is real. Technical diving is too risky to be using their poorly built stuff. Stay away and happy the detail of everything that has gone wrong.

    (I'll spare you the story of my OMS lift bags too).

    Comment on this review

     
    5.0

    Great product, great price

    By Steve S

    from Detroit, Michigan

    About Me Advanced

    Pros

    • Functional
    • Improves Diving Experience
    • Solid Construction

    Cons

      Best Uses

      • Cold Water
      • Tec

      Comments about OMS Isolation Manifold for 3/4" Valve Thread:

      Great set of manifolds at really good price

      Comment on this review

      (7 of 7 customers found this review helpful)

       
      5.0

      OMS Crossbar 300bar

      By Gored

      from Seattle, WA

      About Me Tech Diver

      Verified Buyer

      Pros

      • Improves Diving Experience

      Cons

        Best Uses

        • Extreme Depths
        • Professional

        Comments about OMS Isolation Manifold for 3/4" Valve Thread:

        A great manifold! Make sure if you get this manifold you get the matching OMS tank bands. Also, be aware that there were a group of OMS manifolds that were recalled. Go to [...] for more details. In my experience this manifold has stood up to extreme cold water under 30 degrees F and pretty deep depths over 250'.

        Comment on this review

        Displaying reviews 1-3

        Back to top

        Q&A

        Questions & Answers Powered by TurnTo®

        Questions about this item:

        Shopper  Hello Does this manifold threads match with European Faber tank threads?? Thanks Ivan
        JAMES M  yes, I have a pair of Faber 95s that I set up with this manifold.
        Shopper  Can the bar be removed and the remaining o-ring manifold valves be used as singles? The item description talks about using 803 valves for singles but those are not the ones depicted with the item.
        PETER J  I think they have a cap you can buy that can turn the manifold into individual valves as the isolation bar is screwed onto each valve.
        Shopper  Can the cross valve on this manifold be tightened at a certain angle without rotating afterwards or would I have to buy the other model OMSMR (V-300RC)?
        LeisurePro S  No, the valves on the OMSIM cannot be swiveled; you will have to look at the V-300RC which is a rotating manifold.
        top
        Share this item: