OMS : Picture 1 regular
OMS : Picture 1 thumbnail OMS : Picture 2 thumbnail OMS : Picture 3 thumbnail OMS : Picture 4 thumbnail

Red

OMS

Top Rated Gear
OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift

Your Price

$679.00
Buy more and save
Quantity Discount
QuantityAmount

The quantity discount will be reflected in your shopping cart

In Stock & Ready to Ship
OMS : Picture 1 regular

About OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. The OMS Trieste 60 lb (27.2 kg) lift Dual Bladder Wing is equipped with elastomeric bands for low drag. OMS BC's uses rugged 1000 denier nylon backed with Urethane for superior abrasion resistance in all overhead environments on the outer bag. The inner bladder is constructed of tough polyurethane material with ultrasonically welded seams and fittings for added strength. The inflation and dump valves are interchangeable for ease of configuration from top to bottom. Like all OMS BC's 60 lbs (27.2 kg) dual bladder integrates with many OMS harnesses where integral pull dump tunnels can be used to route the BC dump valve cords for ease of access.

This Wing is engineered with a dual bladder, incorporates a "donut design", resulting in superior buoyancy and trim control. The top of the BC (neck area) has a narrower air pathway design and the bottom air tunnel adds 10 lbs (4.54 kg) of lift (butt area) creating an optimum "heads up" trim position. The Dual Bladder Wing by design maintains a low profile and drag ratio due to the new and unique retraction band system. Diver's side located inflator and dump assemblies eliminate "hang-ups", impact damage and drag in overhead environments. The Dual Wings internal bladders are constructed of tough Polyurethane material with ultrasonically welded seams and fittings for added strength. Both OMS inflators come with low pressure 3/8" threaded quick-disconnect (QD) hoses. The wing band mounting is rubber reinforced with dual cylinder band slots and comes equipped with six corrosion resistant stainless steel grommets. The OMS Trieste Dual Bladder Wing is available in multiple color choices, comes with an owner's manual and is covered by a 12 month limited warranty.

The OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift is commonly used for Cold Water, Extreme Depths, Professional, Recreation and more. The OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift is popular because customers like the following qualities of the OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift: Comfortable, Durable, Easily Adjustable, Lots Of Features.

Warranty Information

This product has a limited warranty of 12 months.

http://www.omsdive.com
8456923600

OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift Features

  • OMS Dual Bladder Bungee Trieste Wing
  • Lift Capacity: 60 lbs (27.2 kg)
  • Designed for Diver Preferring Wing with Redundant Bladder
  • Redundant Bladder: Ensure Proper Buoyancy in Event Primary Bladder Fails
  • Durable Elastomeric Silicone Rubber Bungee Tubing:
    Must for Increasing Deflation Rate
    Create Lower Profile, Less Drag
    Handy when Diving Overhead, Cave & Wreck Environments
  • Inflation & Dump Valves: Interchangeable for Ease of Configuration
  • Integrates with OMS Harnesses: Pull Dump Tunnels, Routes Dump Cords for Ease of Access
  • Donut-Style Wing: Allows Easy Movement of Air Side-to-Side
  • Bladder Design: Provides Optimum "Heads Up" Trim Position
  • Diver's Side Inflator & Dump Assemblies:
    Eliminate "Hang-Ups"
    Prevents Impact Damage
    Won't Drag in Overhead Environments
  • OMS Power Inflators
  • 3/8" Threaded Low Pressure Quick-Disconnect Hoses
  • Upper & Lower: Overpressure Relief/Pull Dump Valves
  • Outer Bag: 1000-Denier Nylon with Urethane Backing
  • Urethane Backing Protects Against Abrasion and Punctures
  • Inner Bladder: Polyurethane with Ultrasonic Welded Seams
  • Zipper Access to Internal Bladder
  • Interior Backing for Zipper: Provides Protect for Bladder
  • Dual Cylinder Band Slots with Mounting Webbing Reinforcement
  • 6-Stainless Steel Grommets
  • Owner's Manual
  • 1 Year Limited Warranty

OMS Dual Bladder Bungee Trieste Wing 60 lbs (27.2 kg) Lift Customer Reviews Powered by TurnTo®

Review Summary

 
4.7

(based on 7 reviews)

100%

of respondents would recommend this to a friend.

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Most Liked Positive Review

 

OMS 60lbs Bungee Wing

It is a great wing for the non-DIR diver. Bungees retract he wing and keeps from spilling air to one side when you move. It is made of suck thick material that it has not ripped yet and I have rubbed it against some really nasty wrecks and rocks. The only downfall is that the flat piece that sits behind the backplate needs to be a little wider...not a big deal, it would just make it a little more comfortable when the wing is inflated. Often DIR picks on this for not being able to inflate ...

View full Review

Reviewed by 7 customers

Displaying reviews 1-5

Back to top

Previous | Next »

 
5.0

A superlative bladder

By

I have used this double (redundant) bladder on deep, wreck, trimix dives, with E8-119 doubles and two 40cuf pony bottles. No need for a back plate when using steel tanks - instead I use two small retention plates. I use the OMS IQ harness system because it is fantastically compfortable. Don't be disuaded by DIR (do i their way). I added a few small pockets by Dive Rite (OMS pockets are way too big) and the entire rig works great. The retention bands help prevent air from shifting around inside a partially filled bladder - and help empty the bladder quickly.

 
4.0

Great Work Horse

By

Good ,well built,alround no frills,tough as old boots wing.

 
5.0

Excellent quality and function

By

Excellent quality bladder.

 
4.0

Very good product

By

This is a very good product that can be use in recreative and/or technical diving knowing that has a good construction and performance.

 
5.0

OMS 60lbs Bungee Wing

By

It is a great wing for the non-DIR diver. Bungees retract he wing and keeps from spilling air to one side when you move. It is made of suck thick material that it has not ripped yet and I have rubbed it against some really nasty wrecks and rocks. The only downfall is that the flat piece that sits behind the backplate needs to be a little wider...not a big deal, it would just make it a little more comfortable when the wing is inflated. Often DIR picks on this for not being able to inflate at depth due to the bungees-you attach the bungees when it is fully inflated so it isn't hard to inflate manually if necessary (depth will put the same pressure on any manual wing inflation)...so don't worry about that.

Displaying reviews 1-5

Back to top

Previous | Next »

Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Blair B  I was wondering if the OMS bladders is compatable with a Dive Right SS back plate?
WESLEY M  Yes, it fits any backplate from the major manufacturers. I have this bladder and use it on several brands of backplates. The center holes and slots of a backplate allow just about any wing to be used.
ALEXEY K  I use it with OMS backplate. However I do not see any problem to fit OMS bladder onto any backplate and DiveRite in particular. Everything depends on the distance between two pins on double tank mount and it is always the same. So you can assemble any bladder/backplate combinatio on it. Again, it is theory. You need just to compare monting parameters on OMS bladder and DR plate. Good luck! Alexey Kozin, MI PADI
GRZEGORZ K  It should be. The mounting system is pretty universal so you should be able to use it with any back plate.
KONSTANTIN M  I cannot answer your question; however, if you email me the dimensions of Dive Right's backplate dimensions & holes, I can compare them against the dimensions/holes of my SS OMS backplate! I hope this might help! My email is... (well, I was told I cannot included it and I can actually enter it on the next page) Alternatively, I can also take pics of the OMS plate, with a measuring tape superimposed...
top
Share this item: