You started diving with Yoke style Cylinder Valves, but you feel the Higher Cylinder Pressure available with DIN Cylinders will be an advantage to your Style-of-Diving. Well, this kit will allow you to do just that, Shed-the-Yoke and Increase Bottom time with this 300 bar (4350 psi) DIN Conversion Kit for your current Oceanic Regulators with USA Yoke to DIN, except for the SP5 Series.
Also, Scuba Divers who Travel Overseas will want to have a DIN Adapter in order to adapt to the tanks available at the local dive sites. The Adapter allows you to Easily-Convert your First Stage, if required, so you can use your own gear rather than rental gear! DIN Assembly is constructed from Marine Grade Corrosion Resistant Chromed Brass Higher Pressure will allow you to Extend-your-Bottom Time. Most HP Cylinders are made from Steel, so you can also remove some of the Weight from your Weight System due to the Lower-Buoyancy-Characteristics of the HP Cylinder. The DIN Conversion Kit is covered by a 24 month limited warranty.
Reviewed by 1 customer
Displaying review 1
Comments about Oceanic DIN Conversion Kit for 1999 Year Regulators & Later:
After two dives on the new regulator with the DIN adapter there was a small air leak coming from the body of the reg. I put the yoke back on and re-tested, thinking I was going to return the reg itself, but it didn't leak at all. So I put the DIN back on and sure enough, little air bubbles. There really isn't enough air escaping to make that big of a difference so I'll mess with it a little more but I'm not all that concerned.
I wouldn't reccomend this product only because I'd go with another brand of regulator all together.