Scroll ←→ for more. Tap to zoom.
Hollis SMS 100 Side-Mount System BCD Single Package XX-Large

Hollis SMS 100 Side-Mount System BCD Single Package XX-Large Features

What's in the box: Hollis SMS 100 Side-Mount System BCD with 1 or 2 LP Quick-Disconnect Hose(s) and Owner's Manual

See size chart

Hollis Gear's new SMS100 Side Mount System was designed not just with the Side-Mount Cave Divers in mind, but Any-Diver. Whether you are a Beginner, Advanced or Technical Diver, this Kit was designed for you. The SMS 100 is Suitable for Side Mounting Twin or Single Cylinders, but also for use with Re-Breathers or Rear Mounted Singles. This System can be used in Any-Environment from Open-Water to the Overhead Environment. The System is Ready-to-Dive Out-of-the-Box.

This Bulletproof Constructed System allows Full Visibility Over-your-Gear, Diver can perform Gas Checks/Management, Configure-and-Monitors all of Gauges, Valves and Hoses without assistance. The System Reduces Additional Gear: Doubles Bands / Hardware / Manifold - Benefit when Traveling, Aids in Transporting Gear to and from the Beach or Boat - one tank at a time. This includes exiting the water on a boat dive. The System Streamlines Profile which in turn Reduces Drag Increasing your Bottom Time.

The SMS100 Side-Mount System Harness comes equipped with 6-Stainless Steel D-Rings on the Padded Shoulder Straps with 4-Pre-Bent for Accessory Attachment. The Harness has Adjustable Shoulder and Sternum Straps equipped with Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing. The Hollis SMS100 Harness has a Stainless Steel Latch-Style" Waist Buckle with Adjustable Crotch Strap. The Crotch Strap is equipped with an Additional Stainless Steel D-Rings for Attachment of Accessory or Scooter. All Hardware is manufactured from 316- Marine-Grade" Stainless Steel.

The Hollis SMS100 Side-Mount System with Inflator Mechanism(s) and Overpressure-Relief/Dump Valve(s), are a 360° Degree Elastic Bungee System (removable) Wing that provides 52lbs (23.6kg) of Lift Capacity. Bladder(s) has a Centrally-Located Inflator Mechanism Elbow(s) to avoid Tank Valve/Regulator Interference, Lower Left Pull Dump/Overpressure Relief Valve (on Single Wing) and Lower Left and Right (Dual Wing) and the Inflator System is made from Durable Impact Resistant Plastic with a Corrugated Rubber Hose. The Internal Components and Inlet Quick-Disconnect Nipple are made from Chrome Plated Brass. The SMS 100 Side-Mount System is equipped with Upper and Lower Cam Band Slots for Single Cylinder Mounting.

This Bulletproof Constructed Wing is manufactured using 1000-Denier CORDURA Nylon with a Polyurethane Lamination Outer Shell & 15mm Urethane Internal Bladder(s).The SMS 100 Side-Mount System is Streamlined Designed for Reduced Drag and Passing-through-Confined Spaces. The SMS 100 Side-Mount System comes with 1 Low Pressure 3/8" Threaded Quick-Disconnect Hoses (or 2 with Redundant Dual Wing), Owner's Manual and is covered by a 24 month limited warranty.

Key Features

  • Designed for Side-Mount Cave Divers, Beginner, Advanced or Technical Divers
  • Suitable for: Side Mounting Twin or Single Cylinders, also for Re-Breathers or Rear Mounted Singles
  • System Uses: Any-Environment from Open-Water to the Overhead Environment
  • System is Ready-to-Dive Out-of-the-Box
  • Bulletproof Constructed System Allows Full Visibility Over-your-Gear
  • Diver Can Perform Gas Checks/Management, Configure-and-Monitors All Gauges, Valves and Hoses w/o Assistance
  • System Reduces Additional Gear: Doubles Bands / Hardware / Manifold - Benefit when Traveling
  • Aids in Transporting Gear: To-and-From Beach or Boat - 1-Tank-at-a-Time
  • Streamlines Profile: Reduces Drag, Increasing Bottom Time
  • Harness: 6-Stainless Steel D-Rings on Padded Shoulder Straps, 4-Pre-Bent for Accessory Attachment
  • Adjustable Shoulder and Sternum Straps
  • Shoulder and Sternum Straps: Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing
  • Stainless Steel Latch-Style" Waist Buckle with Adjustable Crotch Strap
  • Crotch Strap: Additional Stainless Steel D-Rings for Attachment of Accessory or Scooter
  • All Hardware Manufactured from 316- Marine-Grade" Stainless Steel
  • 360° Degree Elastic Bungee System (removable) Wing
  • 52lbs (23.6kg) of Lift Capacity
  • Available with Single or Dual Wing (Redundant System)
  • Centrally-Located Inflator Mechanism Elbow(s): Avoid Tank Valve/Regulator Interference
  • Lower Left Pull Dump/Overpressure Relief Valve (on Single Wing)
  • Lower Left and Right Pull Dump/Overpressure Relief Valves (Dual Wing)
  • Hollis Power Inflator System(s):
    Durable Impact Resistant Plastic with a Corrugated Rubber Hose(s)
    Internal Components and Inlet Quick-Disconnect Nipple: Corrosion Resistant Chrome Plated Brass
  • 3/8" Threaded Low Pressure Quick-Disconnect Hose(s)
  • Dual Cam Band Slots for Single Cylinder Mounting
  • Owner's Manual
  • 2 Year Limited Warranty

Warranty Information

This product has a limited warranty of 24 months.

www.hollisgear.com/support_warranty.asp
(510) 729-5110

Q&A