What's in the box: Hollis SMS 100 Side-Mount System BCD with 1 or 2 LP Quick-Disconnect Hose(s) and Owner's Manual
Hollis Gear's new SMS100 Side Mount System was designed not just with the Side-Mount Cave Divers in mind, but Any-Diver. Whether you are a Beginner, Advanced or Technical Diver, this Kit was designed for you. The SMS 100 is Suitable for Side Mounting Twin or Single Cylinders, but also for use with Re-Breathers or Rear Mounted Singles. This System can be used in Any-Environment from Open-Water to the Overhead Environment. The System is Ready-to-Dive Out-of-the-Box.
This Bulletproof Constructed System allows Full Visibility Over-your-Gear, Diver can perform Gas Checks/Management, Configure-and-Monitors all of Gauges, Valves and Hoses without assistance. The System Reduces Additional Gear: Doubles Bands / Hardware / Manifold - Benefit when Traveling, Aids in Transporting Gear to and from the Beach or Boat - one tank at a time. This includes exiting the water on a boat dive. The System Streamlines Profile which in turn Reduces Drag Increasing your Bottom Time.
The SMS100 Side-Mount System Harness comes equipped with 6-Stainless Steel D-Rings on the Padded Shoulder Straps with 4-Pre-Bent for Accessory Attachment. The Harness has Adjustable Shoulder and Sternum Straps equipped with Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing. The Hollis SMS100 Harness has a Stainless Steel Latch-Style" Waist Buckle with Adjustable Crotch Strap. The Crotch Strap is equipped with an Additional Stainless Steel D-Rings for Attachment of Accessory or Scooter. All Hardware is manufactured from 316- Marine-Grade" Stainless Steel.
The Hollis SMS100 Side-Mount System with Inflator Mechanism(s) and Overpressure-Relief/Dump Valve(s), are a 360° Degree Elastic Bungee System (removable) Wing that provides 52lbs (23.6kg) of Lift Capacity. Bladder(s) has a Centrally-Located Inflator Mechanism Elbow(s) to avoid Tank Valve/Regulator Interference, Lower Left Pull Dump/Overpressure Relief Valve (on Single Wing) and Lower Left and Right (Dual Wing) and the Inflator System is made from Durable Impact Resistant Plastic with a Corrugated Rubber Hose. The Internal Components and Inlet Quick-Disconnect Nipple are made from Chrome Plated Brass. The SMS 100 Side-Mount System is equipped with Upper and Lower Cam Band Slots for Single Cylinder Mounting.
This Bulletproof Constructed Wing is manufactured using 1000-Denier CORDURA Nylon with a Polyurethane Lamination Outer Shell & 15mm Urethane Internal Bladder(s).The SMS 100 Side-Mount System is Streamlined Designed for Reduced Drag and Passing-through-Confined Spaces. The SMS 100 Side-Mount System comes with 1 Low Pressure 3/8" Threaded Quick-Disconnect Hoses (or 2 with Redundant Dual Wing), Owner's Manual and is covered by a 24 month limited warranty.
This product has a limited warranty of 24 months.