Scroll ←→ for more. Tap to zoom.
Hollis SMS100 Dual Wing Only

Hollis SMS100 Dual Wing Only Features

What's in the box: Hollis SMS100 Dual Wing Only with 2-Low Pressure Quick-Disconnect Hoses

Hollis Gear's new SMS100 Side Mount System was designed not just with the Side-Mount Cave Divers in mind, but Any-Diver. Whether you are a Beginner, Advanced or Technical Diver, this Kit was designed for you. The SMS 100 is Suitable for Side Mounting Twin or Single Cylinders, but also for use with Re-Breathers or Rear Mounted Singles. This System can be used in Any-Environment from Open-Water to the Overhead Environment.

The Hollis SMS100 Dual Redundant Wing, Bladders with 2-Inflator Mechanism and 2-Overpressure-Relief/Dump Valve (Harness Not Included), is a 360° Degree Elastic Bungee System (removable) Wing that provides 52lbs (23.6kg) of Lift Capacity. Bladders have Centrally-Located Inflator Mechanism Elbows to avoid Tank Valve/Regulator Interference, Lower Left and Right Pull Dump/Overpressure Relief Valves and the Inflator Systems are made from Durable Impact Resistant Plastic with a Corrugated Rubber Hose. The Internal Components and Inlet Quick-Disconnect Nipple are made from Chrome Plated Brass. The SMS 100 Wing is equipped with Upper and Lower Cam Band Slots for Single Cylinder Mounting.

This Bulletproof Constructed Wing is manufactured using 1000-Denier CORDURA Nylon with a Polyurethane Lamination Outer Shell & 15mm Urethane Internal Bladder. The SMS 100 Bladder is Streamlined Designed for Reduced Drag and Passing-through-Confined Spaces. The SMS 100 Dual Wing comes with 2-Low Pressure 3/8" Threaded Quick-Disconnect Hoses and is covered by a 24 month limited warranty.

Key Features

  • SMS100 Side Mount System Dual Wing Bladder
  • Designed for Side-Mount Cave Divers, Beginner, Advanced or Technical Divers
  • Suitable for: Side Mounting Twin or Single Cylinders, also for Re-Breathers or Rear Mounted Singles
  • System Uses: Any-Environment from Open-Water to the Overhead Environment
  • Hollis SMS100 Dual Redundant Bladder Wing: Bladders with Inflator Mechanisms and Overpressure-Relief/Dump Valves (Harness Not Included)
  • 360° Degree Elastic Bungee System (removable)
  • 52lbs (23.6kg) of Lift Capacity
  • Centrally-Located Inflator Mechanism Elbows: Avoids Tank Valve/Regulator Interference
  • Lower Left and Lower Right Pull Dump/Overpressure Relief Valves
  • Dual Hollis Power Inflator System:
    Durable Impact Resistant Plastic with a Corrugated Rubber Hoses
    Internal Components and Inlet Quick-Disconnect Nipple: Corrosion Resistant Chrome Plated Brass
  • 3/8" Threaded Low Pressure Quick-Disconnect Hoses
  • Dual Cam Band Slots for Single Cylinder Mounting
  • 2 Year Limited Warranty

Warranty Information

This product has a limited warranty of 24 months.

www.hollisgear.com/support_warranty.asp
(510) 729-5110