Hollis LX Wing

Hollis Gear
SKU: HLSLXW

About Hollis LX Wing

Hollis Gear is proud to release the new LX Wing Range, developed and tested by Technical Divers and 3 years in the making. Quality and Performance are the two most Integral-Features of this product, which is why Hollis Gear has Reintroduced the Proven S Series and C Series Wings with Key-Improvements. New materials include a 1680D CORDURA for the Exterior Bladder and 420-Nylon for the Internal Bladder.

The LX design also includes a 360° Degree Internal Retraction System. This has been added to match the design of the wing, allowing for a Streamlined Rig at All-Times. Hollis has also added a new Oval Corrugated Hose to the Power Inflator Mechanism, Redesigned Overpressure Relief Valve (OPV) and Corrosion Resistant Stainless Steel Grommets to replace the Mesh on the Bottom-of-the-Wing. Every new LX Wing includes a Limited Lifetime Warranty.

The Hollis LX Wings have Welded Flange and One-Piece Retainer for Servicing without the need for tools. Centrally-Located Inflator Mechanism Elbow to avoid Tank Valve/Regulator Interference, Lower Left Pull Dump/Overpressure Relief Valve and the Inflator System is made from Durable Impact Resistant Plastic with a Corrugated Rubber Hose. The Internal Components and Inlet Quick-Disconnect Nipple are made from Chrome Plated Brass. The LX Wing is equipped with Cam Band Slots for Cylinder Mounting. The Wing is available in 2-Lift Capacities of 25lbs or 38lbs (11.3kg or 17.24kg).

Warranty Information

This product has a limited warranty of 24 months.

www.hollis.com/support/warranty/
(510) 729-5110

Hollis LX Wing Features

  • New Hollis Gear LX Wing Range
  • Developed and Tested by Technical Divers and 3-Years in the Making
  • Integral-Features: Quality and Performance, Key-Improvements
  • 1680D CORDURA Exterior Bladder
  • 420-Nylon Internal Bladder
  • 360° Degree Internal Retraction System for a Streamlined Rig at All-Times
  • New Oval Corrugated Hose Power Inflator Mechanism
  • Redesigned Overpressure Relief Valve (OPV)
  • Corrosion Resistant Stainless Steel Drain Grommets
  • Welded Flange and One-Piece Retainer: Servicing w/o Need-for-Tools
  • Centrally-Located Inflator Mechanism Elbow: Avoids Tank Valve/Regulator Interference
  • Lower Left Pull Dump/Overpressure Relief Valve
  • Hollis Power Inflator System:
    Durable Impact Resistant Plastic with a Corrugated Rubber Hose
    Internal Components and Inlet Quick-Disconnect Nipple: Corrosion Resistant Chrome Plated Brass
  • Cam Band Slots for Cylinder Mounting
  • 2-Lift Capacities of 25lbs or 38lbs (11.3kg or 17.24kg)
  • Limited Lifetime Warranty

Hollis LX Wing Specifications

Bc Body
Back Inflator (Wing)
Buoyancy Bag
25Lbs Or 38Lbs (11.3Kg Or 17.24Kg)
Valves
Lower Left Pull Dump/Overpressure Relief Valve
Oral Inflator
Hollis Gear Power Inflator Mechanism
Materials
Outer Bag: 1680D Cordura, Inner Bladder: 420-Nylon
Weight [with packaging]
25 Lb: 3 lb,
38 Lb: 3.2 lb
Mfr #
SKU
HLSLXW
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

donny hm l  Can the Lx38 fit on zeagle backplate without cam band adaptor?
Joe S  Yes it can. It will fit on any backplate that has the standard 11" grommet holes.
Evan B  Does this come with the book screws to attach to the BP?
Joe S  It does not come with the book screws.
Evan B  Does this come with the book screws to attach to the BP?
Joe S  It does not come with the book screws.
top
Share this item: