Short hose fix to avoided losing signal with transmitter
By
IGNACIO C.
-
North Miami, FL, US
My primary use of this short hose is to connect my transmitter and avoid losing connection with my Garmin computer. I had an issue when I first connected it since it was leaking, but then one of the DM on the boat realized I had to change a pin in my transmitter to make it work. My transmitter had that optional pin, changed it and worked fine. Had spoken to Garmin customer service and they recommended using a short hose and prevent the transmitter from hiding in the back and lose connection
You have a Hollis Submersible Pressure Gauge (SPG) see SKU: HLSPGM and need just the right length Hose for your set-up. Do you need a short hose for use with a stage bottle or a full-length hose for your primary regulator? Whatever your need is Hollis has a hose to match those needs. Hose is available in 6" (15cm), 9" (23cm), 24" (61cm) and 28" (71cm) lengths. Hose is a durable braided with rubber jacket hose and comes equipped with corrosion resistant chrome plated brass fittings. Hose has a 7/16" male threaded end for attachment to your first stage regulators high pressure port. Hose is complete with O-rings, so it's ready for hook-up out-of-the-box.
This product can only be shipped to U.S. addresses.
WILLIAM D
Looking for a short hose to go from my 1st stage to my wireless transmitter. Will this work for that application?
JOE S
Yes, this will work. It is the same thread as the HP Gauge.
SUNG HYUN L
I am going to buy hollis high pressure hose size 6"
does it fit with SPG(highland by XSs scuba brass/glass pressure guages)
and scubapro MK25 1st stage HP outlet
do I need additional items?
EDWIN W
fits very well no additional parts needed if you have the complete highland spg assembly
Joshua V
I have this pressure gage witch has a standard fitting and will work. I haven't used the MK25, but I would assume it has standard port threads in which case it will work as well. I have this hose in 24" going from my Zeagle 50D to the XS gage on my primary rig. Works great!
JAMES J
Hi. I can't tell you about the specific device/port you mentioned, but they are all pretty standard for HP fittings. You will need:
XS Scuba Air-Spool with Buna N O-Rings
(Not necessarily that brand, but that's what I got.) This goes in the fitting between the end of the hose and the gage. (You may have one from the previous hose, but it's good to have spares.)
CARL K
I purchased this hose but my SPG will not fit, it leaks bad. So what type or style SPG, the base connection does this connect?
YAN G
Did you use a spool in the hose where it connects to the gauge? That is needed, and may be why it leaked. This uses a standard connection, and should fit all current pressure gauges.
Shopper
Why Did You Choose This?
CHARLES C
to attach the Garmin T1 transmitter to my 1st stage