What's in the box: Hollis Elite 2 Harness with Aluminum Back Plate, Pre-Strung
Tech/Rec is at its best with the Elite 2 Harness. The Elite 2 Harness System offers you all the features of a Technical Harness with the Added Comfort that Recreational Divers look for. The Harness has Adjustable Shoulder and Sternum Straps equipped with Squeeze-Style" Side-Release Buckles for Easy Donning and Doffing. The Shoulder Straps also incorporate Adjustable and Removable Shoulder Pads with 3-Adjustable Stainless Steel Pre-Bent D-Rings on each Shoulder for Accessory Attachment.
The Hollis Elite 2 Harness has a Stainless Steel Latch-Style" Waist Buckle. All Hardware is manufactured from 316- Marine-Grade" Stainless Steel. There are 2-Additional Stainless Steel D-Rings on the Waist Strap for Additional Rigging requirements. The Hollis Aluminum Back Plate is engineered to Fit-Closer to the Cylinders Preventing GAPEOSIS", creating a Tighter-Profile and as a result Reduces Drag. The Edges on the Outside of the Hollis Back Plate are Radius-Formed to fit the Hollis BC, thereby preventing Back-Plate-Chafing of the BC. The Webbing that passes through the Slots in the Back Plate must continue to function throughout the dive season without appreciable abrasion. The Slots, Holes and Edges of the Hollis Back Plate are Fully De-Burred Eliminating Sharp-Edges that can cut you and your harness system. Back Plate has 1" & 2" (2.5cm & 5cm) Slots for incorporating a Crotch Strap. The Harness and Back Plate weighs approximately 3.7lbs (1.68kg) and is covered by a 24 month limited warranty.