What's in the box: First Stage, Second Stage Owner's Manual and Either Yoke or Station Filler (See Select Type)
You're 60' (18 meters) down, and your Primary Air Source malfunctions, you can't get air! What do you do? Pull-Out your Extra Air Source, Calmly Make-your-Way to the Surface, Make-a-Safety-Stop and once back on the boat or on shore thank your Lucky Stars" you dove with the Extra Air Source. The Extra Air Source removes existing limits on Redundant Air currently on the market and allows you to configure a Redundant-Air-Source tailored to your Diving- Needs. Whether you're Cave Diving or Diving Shallow Reefs the Extra Air Source will get you to the Surface and even provide you with Enough-Air for a Safety Stop if configured correctly for your maximum depth.
Having a Redundant Air Source for Increased Safety allows Independent Emergency Air not Dependent on your Primary Air Supply. An Octopus or Breathable Inflator System both depend on the Reliability of your Primary Air Source. If it malfunctions you're Out-of-Air! The EAS3 gives you the Reliability of a Redundant-Air-System using a Dependable Balanced Diaphragm First Stage with a Downstream Demand Valve Second Stage.
The RG3V Balanced Diaphragm, Forged, Black Chrome Plated Marine Brass First Stage Regulator is inherently Environmentally Sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. With the RG3V there is a Secondary Environmental Diaphragm Membrane that seals off the spring chamber keeping the first stage completely sealed off from the environment adding a second layer of corrosion resistance. The First-Stage Regulator threads directly into the Neck-of-the-Cylinder eliminating the Need-or-Bulk of a Cylinder Valve, First Stage has a Sure-Grip On/Off Valve Hand-Wheel that is Easy-to-Turn even with gloved hands. The First Stage is equipped with 3-Low Pressure Ports and 2-High Pressure Port.
The Second Stage Regulator has a Bright Yellow Purge Cover, is a Dependable simple Downstream Demand Valve design which connects to the First Stage via a 360 Vertical/ Horizontal Swivel. The Second Stage has a Quality Silicone Mouthpiece, Diaphragm and Dual Exhaust Valves in a Dual Exhaust Manifold for Ease-of-Inhalation/Exhalation when in an Emergency Out-of-Air Situation. The Large Purge Button makes Clearing-the-Regulator Safe and Easy. The First-Stage Regulator threads directly into the neck of a 3/4"-14 NPSM cylinders eliminating the need or bulk of a cylinder valve, it also gives you the latitude of selecting the size of cylinder to be utilized.
The Extra Air Source is available in two Models. If you find that you will be filling your unit predominantly at your local dive store or on a dive boat that can fill cylinders then you will prefer the Station Filler Model, if you will be filling your unit while on the fly, then you will need the Yoke Model which allows filling from your Scuba Cylinder. If you find you may need both then the SKU's for the two Filler Adapters are as follows: H2EASSFA Station Filler and H2EASYFA Yoke Filler. Product comes with an Owner's Manual and is covered by a 24 month limited warranty.
This product has a limited warranty of 24 months.