The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today. The Dive Rite XT1 First-Stage Regulator with Five-3/8" Threaded Low Pressure Ports gives divers Ultimate Flexibility in Hose Routing. This is Especially Beneficial to the Back-Mount Technical Diver where the need for a Streamlined Regulator Configuration is required. It does not cause undue stress on the hoses. One of the 5 LP Port is located on the Top-of-the-Turret and is designed with Safety and Convenience in Mind. The Port is slightly Convex and Slotted on each Side to accommodate an 11/16" wrench for Securing the Turret while loosening the LP Hose. This makes it Easy-to-Change the Hose without concern of loosening the Turret. The Regulator comes equipped with 2 HP Ports with 7/16" Threads that are Angled-90? from the DIN/Yoke fitting, which gives the perfect angle for hose routing.
Designed for the Challenging world of Technical Diving, this Regulator is pending certification to CE EN 250 and its approval for cold water 4,350 psi (300 bars) service, having passed the most rigorous of tests by Dive Rite. The Balanced Diaphragm, Black Chrome Plated Marine Brass First Stage Regulator is inherently Environmentally-Sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance.
With the XT1 there is a Secondary Environmental Diaphragm Membrane that seals off the spring chamber keeping the First Stage Completely-Sealed-Off from the Environment adding a Second-Layer of Corrosion Resistance and Prevention of Freezing in Cold-Water-Use. A Pneumatically Balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure. The XT1 First-Stage Regulator is available in either DIN or Yoke Versions.
The Second-Stage Regulator ha an Ergonomic Dive/Pre-Dive Venturi Lever that is Easy-to-Adjust even with thick gloves. The Venturi Lever prevents Regulator Free-Flow. Second-Stage uses a Pneumatically Balanced Downstream Valve, which provides better performance at depth.
The Second Stage has an External Adjustment Valve to Fine-Tune Inhalation Effort. The Second-Stage Housing and Cover are manufactured from Durable Impact Resistant ABS Plastic with Chromed Brass Adjustment Knob and barrel Tube. The Spring-and-Lever are Stainless Steel and the Second-stage comes standard with Teflon Coated Internal Parts, which makes it cold-water ready. The XT Regulator comes with a 28" (71.1 cm) 3/8" Threaded Low Pressure Hose, is Nitrox Ready, comes with an Owner's Manual and is covered by a Limited Lifetime Warranty.
This product has a limited warranty of 12 months.