Dive Rite 3100 Ice Regulator DIN

Dive Rite
SKU: DIVR3100I

About Dive Rite 3100 Ice Regulator DIN

Five low pressure ports on the 3100 Regulator gives divers ultimate flexibility in hose routing This is especially beneficial to the back mount technical diver where the need for a streamlined reg configuration can cause undue stress on the hoses

Our 5th LP port is located on the top of the turret and we designed it with safety and convenience in mind The port is slightly convex and slotted on each side to accommodate an 11/16 wrench for securing the turret while loosening the LP hose This makes it easy to change the hose without concern of loosening the turret

The 3100 Series Regulator is the same high-performance, workhorse reg as the former 3000 Designed for the challenging world of technical diving, this reg is certified to CE EN 250 and approved for cold water 300 bar service, having passed the most rigorous of tests

A pneumatically balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure A diaphragm first stage means regulator parts are not exposed to the environment, protecting it from contaminates and debris An ergonomic venturi lever is easy to adjust even with thick gloves

** CAUTION: The 3100 Regulator is suitable for oxygen use only if precautions are taken Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use and open the tank valve slowly each time the regulator is pressurized These are normal operating instructions and safety precautions for any equipment used with oxygen mixtures above 40% Please refer to your agency training guidelines for additional information on how to safely dive oxygen mixtures above 40%

Dive Rite 3100 Ice Regulator DIN Features

  • RG3100 First Stage
  • Meets the European EN 250 - 2003 norms
  • Pneumatically balanced design
  • Spinning turret
  • Five low pressure ports (3/8-24 UN)
  • Two high pressure ports (7/16-20 UNF/ISO263)
  • Connector: 300 bar and Yoke adapter
  • Intermediate pressure: 140 PSI
  • Temperature rating: 50 to 95 F (10 to 19 C)
  • O-rings: oxygen compatible o-rings and lubricant
  • DIN connection with DIN dust cover
  • RG3100 Second Stage
  • All internal moving parts are Teflon coated for cold-water use
  • Internal second stage valve: Balanced downstream
  • Second stage adjustment knob: Fine-tunes inhalation effort
  • RG1225 yoke adapter included
  • 3.1 lbs (1.4 kg)

Dive Rite 3100 Ice Regulator DIN Specifications

1'St Stage Type
Pneumatically Balanced Design
Lp Ports
Five Low Pressure Ports (3/8-24 Un)
Hp Ports
Two High Pressure Ports (7/16-20 Unf/Iso263)
Adjustable 2'Nd Stage
Null
Nitrox Compatible
Null
2Nd Stage Type
Null
Materials
Null
Hose Thread
Null
Hose Length
Null
Available in the Following Sizes:
28" Hose, 84" Hose
Total Weight
3.1 Lbs (1.4 Kg)
top
Share this item: